DM16 PC/104 to ISA Bus Adapter

 Features:

• Allows use of PC/104 modules in an ISA bus slot
• Provides full AT/XT connection between PC/104 and ISA bus
• I/O connectors convert dataModule 50 pin I/O header to 50 pin box header connector (interface cable included) 
• Includes I/O connector for digital or analog I/O

The PC/XT/AT compatible DM16 PC/104 to ISA bus adapter is an easy way to use one or more PC/104 modules in an ISA bus system.  The DM16 holds one or more PC/104 modules, and connects their XT or AT bus stacking connector to the ISA bus edge card connector.  This allows mixing of PC/104 and ISA bus products for development, testing, or a final product.  

I/O connectors can be used to connect the 50-pin dual-in-line header of a dataModule to a 50-pin box header connector which extends out the back of a standard PC enclosure for easy access.

The DM16 is provided with a stackthrough PC/104 bus connector so that PC/104 modules may be stacked on both sides.

• PC/104 XT/AT bus connector (64 + 40 pins)
• ISA-bus XT/AT bus edge-connector
• 50-pin dual-in-line I/O connector
• 50-pin box header connector

Physical Attributes:

• Size: 
  160mm L x 20mm W x 115mm H 
  (6.35"L x 0.8"W x 4.5"H)
• Weight: Approximately 0.29 Kg (0.64 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing (carrier card only)
• Storage Temperature: -65° to +125 °C
• Power requirements = None

Recommended Accessories:

• Cable Kit XT50

Ordering Information

Copyright © 1998-2010 RTD Embedded Technologies, Inc.  All rights reserved.