CMH6486DX66HR or CMH6486DX100HR
PC/104 cpuModules™ with Dual SSD Sockets
-40° to +85°C Operation
|
|
|
|
|
COM2
|
|
COM1
|
|
|
Parallel
|
|
|
Utility: Keyboard Speaker Battery
Reset
|
|
|
Power
|
ISA
(PC/104)
|
|
|
|
CMH6486DX100HR-64 cpuModule
|
|
- 66 / 100 MHz 486DX
- 16, 32, or 64MB surface mount DRAM on-board
- SSD socket
- Software selectable RS-232/422/485
- Virtual Device Mode and Flash BIOS
-
Windows® CE Certified
Features:
- Complete PC-compatible motherboard
- 3.3 volt 486DX4-100 MHz processor
- Stackable 104-pin PC/104 AT bus
- Internal math coprocessor
- 16KB internal cache
- Built-in SETUP program
- BIOS with enhancements for nonvolatile configuration, Quick Boot, Solid State Disk
& virtual device support
- 1024-bit EEPROM (user bits)
- 3 timer/counter channels
- 7 DMA channels
- 14 interrupt channels
- 32-pin DIP socket for Solid State Disk support:
| DiskOnChip 2000 (to 288
MB) |
MCSI "Prom Disk" |
EPROM (up to 1MB) |
| Flash EPROM (up to 512 KB) |
Atmel Flash (up to 512
KB) |
SRAM (up to 512 KB) |
| NOVRAM (up to 512 KB) |
|
|
I/O:
- Two software-configurable RS-232/422/485 serial ports
- 16550 compatible UARTs for high-speed
- Termination resistors for RS-422/485
- Parallel port
- SPP, PS/2 bi-directional, & ECP
-
Utility port
-
PC-AT compatible keyboard port
- Speaker (0.1W output) port
- Hardware Reset input
- Battery input for Real Time Clock
- Watchdog timer
Software:
-
RTD Enhanced BIOS with built-in SETUP
-
Fail Safe Boot Mode using embedded ROM-DOS
-
Includes ROM-DOS , SSD
software, utilities, and example programs.
-
Operates under standard PC operating systems:
-
MS-DOS, ROM-DOS, DR-DOS
-
Windows (3.1x, 95, 98, ME, NT, CE)
-
RTOSs such as QNX, OS/2, UNIX, RTXC, Vx Works
-
Note: drivers may be required to use non-PC hardware features
Physical
Attributes:
-
Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
-
Weight: Approximately 0.10 Kg (0.22 lbs.)
-
Operating Temperature: -40° to +85°C: 90% humidity non-condensing
-
Storage Temperature: -55° to +125 °C
- Power requirements 66 MHz: 4.5 W @ 5 VDC typical, with 16MB DRAM
- Power requirements 100 MHz: 5.6 W @ 5 VDC typical, with 16MB DRAM
-
Ordering Information
| Part Number
| Description
| OEM Price
|
|
CMH6486DX66HR-16
|
16MB 486DX cpuModule |
RFQ |
|
CMH6486DX66HR-32
|
32MB 486DX cpuModule |
RFQ |
|
CMH6486DX66HR-64
|
64MB 486DX cpuModule |
RFQ |
|
CMH6486DX100HR-16
|
16MB 486DX cpuModule |
RFQ |
|
CMH6486DX100HR-32
|
32MB 486DX cpuModule |
RFQ |
|
CMH6486DX100HR-64
|
64MB 486DX cpuModule |
RFQ |
Recommended Accessories
CM112HR VGA Peripheral Module with FDD/HDD
interfaces
XK-CM10 Cable Kit
You can use Adobe Acrobat freeware to view and print our datasheet for
this product
CMH6586DX133 cpuModule
PC/104 menu
Home
Copyright © 1998-2009 RTD Embedded Technologies, Inc. All rights reserved.
