Features:

• PC/104 ISA Expansion Bus
•  256 & 512 Mbytes  SDRAM
• 32 pin SSD socket supports:
  • Miniature 1GB ATA/IDE Flash Disk installed unless otherwise specified; 4GB optional
  • Natively supported by all major operating systems
• PC Speaker
• Real Time Clock Battery backup
• Modular rugged milled aluminum frames 
• Integral Structural Heatsink with Embedded Heatpipe, Eliminates fan
• Complete PC-compatible motherboard
• Maintains the PC/104 bus self-stacking concept 
• Allows quick interchangeability of modules 
• Each frame includes CME136686LX500HR cpuModule™, CMT36106HR Peripheral Module, wiring and connectors 
• Aluminum Alloy - 6061, Temper-T6, clear chromate 

External I/O Ports:

• Two 9 pin male D-Sub connectors with RJ-45 Adapters

  • 10/100 BASE-T Ethernet
    • Ethernet Controller
      • Intel 82559ER Fast Ethernet PCI Controller
      • Integrated 3KByte Transmit and 3Kbyte Receive FIFOs
    • Physical Layer
      • 100Base-Tx and 10Base-T
    • Easy to Use
      • Low Power Features
      • Status LEDs
      • Software configuration
• 15 pin female high density D-Sub Monitor connector &
  20 pin female micro D-Sub LVDS Panel connector
  • SVGA CRT interface and LVDS Panel
    • Pipelined burst reads/writes for increased performance 
    • Video Generator improves memory efficiency for display refresh with SDRAM
    • Supports following modes:
      • 640 x 480 (256 & 64K color)
      • 800 x 600 (256 & 64K color)
      • 1024 x 768 (256 & 64K color)
      • 1280 x 1024 (256 color)
• Two 9 pin male D-Sub connectors
  • Software-configurable RS-232/422/485 serial ports
    • 16550 compatible UARTs for high-speed
    • Termination resistors for RS-422/485
• 9 pin female D-Sub connector
  • Two USB 2.0 Ports
    • Supports 480 Mb/s (high-speed), 12Mb/s (full-speed), and 1.5Mbs (low speed) peripherals
    • 500 mA @ 5 Vdc provided per port
    • USB Boot capability
• 25 pin female D-Sub connector
  • multiPort function connector
    • Parallel port
      • SPP, PS/2 bi-directional, EPP & ECP
    • Advanced Digital I/O (aDIO^™)
      • One 8-bit port programmable as input or output
      • Eight bit-programmable I/O with Advanced Digital Interrupt Modes
        • Event Mode Interrupt generates an interrupt when any input bit changes
        • Match Mode Interrupt generates an interrupt when input bits match a preset value
        • External Strobe Mode latches 8 data inputs and generates and interrupt
      • Two Strobes can be configured as readable inputs.
    • Floppy controller interface
• 6 pin female mini-DIN connector
  • PS/2 Mouse port
• 6 pin female mini-DIN connector
  • PC compatible keyboard port
• Hardware Reset Button
• 9 pin female D-Sub connector
  • Power I/O port
    • Gnd, ±12 & 5 VDC

Internal I/O Ports:

Software:

• RTD Enhanced Award BIOS with built-in SETUP, USB Boot and Quick Boot Mode Installed
• Compatible with x86 operating systems:
• MS-DOS
• Windows (98, NT 4.0, 2000, XP, and XP Embedded)
• Linux (desktop and real-time versions)
• RTOSes such as QNX, VxWorks, and Windows CE
• Note: Drivers may be required to use non-PC hardware features.

Physical Attributes:

• Size: 152mm L x 130mm W x 34mm H (5.983"L x 5.117"W x 1.339"H)
• Weight: Approximately 0.69 Kg (1.52 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125 °C
  • ATA Flash Disk limit: -40° to +100 °C
• Power requirements 500 MHz: 6.2 W @ 5 VDC typical

cpuModule™ Specifications:

• CME136686LX500HR

Peripheral Module Specifications:

• CMT36106HR

Documentation and Software Downloads:

• IDAN Pinout and Dimensional Drawings (see Appendix C)
• CME136686LX Hardware Manual
• CMT36106 Hardware Manual
• Geode LX Migration guide
• Drivers and Example Programs
• Software Manual(s)
• Application Notes

Ordering Information 

Copyright © 1998-2006 RTD Embedded Technologies, Inc.  All rights reserved.