Features:

• PC/104-Plus PCI Expansion Bus
• PC/104 ISA Expansion Bus
• 32 & 128Mbytes  SDRAM
• 32 Pin SSD Socket Supports: SRAM, Flash, EPROM & 32MB DiskOnChip
  • 32MB DiskOnChip installed unless otherwise specified
• PC Speaker
• Real Time Clock Battery backup
• Modular rugged milled aluminum frames 
• Integral Structural Heatsink, Eliminates fan
• Complete PC-compatible motherboard
• Maintains the PC/104 bus self-stacking concept 
• Allows quick interchangeability of modules 
• Each frame includes CMX27686HX300HR cpuModule™, CM102HR Peripheral Module, wiring and connectors 
• Aluminum Alloy - 6061, Temper-T6, clear chromate 

External I/O Ports:

• Two 9 pin male D-Sub connectors
  • Software-configurable RS-232/422/485 serial ports
    • 16550 compatible UARTs for high-speed
    • Termination resistors for RS-422/485
• 9 pin female D-Sub connector
  • Two USB 1.0 Ports
    • Supports both 12Mb/s (full-speed) and 1.5Mbs (lowspeed) peripherals
    • 500 mA @ 5 Vdc provided per port
• 15 pin female high density D-Sub connector
  • SVGA
    • Pipelined burst reads/writes for increased performance 
    • Video Generator improves memory efficiency for display refresh with SDRAM
    • Supports following modes:
      • 640 x 480 (256 & 64K color)
      • 800 x 600 (256 & 64K color)
      • 1024 x 768 (256 & 64K color)
      • 1280 x 1024 (256 color)
• 26 pin female high density D-Sub connector
  • Advanced Digital I/O (aDIO^™)
    • One 8-bit port programmable as input or output
    • Eight bit-programmable I/O with Advanced Digital Interrupt Modes
      • Event Mode Interrupt generates an interrupt when any input bit changes
      • Match Mode Interrupt generates an interrupt when input bits match a preset value
      • External Strobe Mode latches 8 data inputs and generates and interrupt
    • Two Strobes can be configured as readable inputs.

• 9 pin female D-Sub connector with RJ-45 Adapter

  • 10/100 BASE-T Ethernet
    • Ethernet Controller
      • Intel 82559ER Fast Ethernet PCI Controller
      • Integrated 3KByte Transmit and 3Kbyte Receive FIFOs
    • Physical Layer
      • 100Base-Tx and 10Base-T
    • Easy to Use
      • Low Power Features
      • Status LEDs
      • Software configuration
• 6 pin female mini-DIN connector
  • PS/2 Mouse port
• 6 pin female mini-DIN connector
  • keyboard port
• Hardware Reset Button
• 9 pin female D-Sub connector
  • Power I/O port
    • Gnd, ±12 & 5 VDC

Internal I/O Ports:

• IDE and Floppy Controllers
• Standard Floppy power connector
• 32-pin DIP socket for Solid State Disk support:
  • Standard: 32MB DiskOnChip installed unless otherwise specified
  • On request: MCSI "Prom Disk", EPROM to 1MB, Flash EPROM to 512 KB,
    Atmel Flash to 512 KB, SRAM to 512 KB, & NOVRAM to 512 KB

Physical Attributes:

• Size: 152mm L x 130mm W x 34mm H (5.983"L x 5.117"W x 1.339"H)
• Weight: Approximately 0.69 Kg (1.52 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125°C
• Power requirements 300 MHz: 7.5 W @ 5 VDC typical

cpuModule™ Specifications:

• CMX27686HX300HR

Peripheral Module Specifications:

• CM102HR

Documentation and Software Downloads:

• IDAN Pinout and Dimensional Drawings
• CMX27686HX Hardware Manual
• CM102 Hardware Manual
• Drivers and Example Programs
• Software Manual(s)
• Application Notes

Ordering Information

Copyright © 1998-2006 RTD Embedded Technologies, Inc.  All rights reserved.