Features:

• PC/104 ISA Expansion Bus
• 128, 256 & 512 Mbytes  SDRAM
• PC Speaker
• Real Time Clock Battery backup
• Modular rugged milled aluminum frames 
• Integral Structural Heatsink with Embedded Heatpipes & External Fins for superior heat dissipation
• Complete PC-compatible motherboard
• Maintains the PC/104 bus self-stacking concept 
• Allows quick interchangeability of modules 
• Each frame includes CML36786HX400HR cpuModule™, CMT36106HR Peripheral Module, wiring and connectors 
• Aluminum Alloy - 6061, Temper-T6, clear chromate 

• 9 pin female D-Sub
  • AC97 Audio Support
    • SoundBlaster Compatible
    • Selectable Headphone or Line level output
    • Line level input
    • Microphone input

• 9 pin male D-Sub connector with RJ-45 Adapter

  • 10/100 BASE-T Ethernet
    • Ethernet Controller
      • Intel 82559ER Fast Ethernet PCI Controller
      • Integrated 3KByte Transmit and 3Kbyte Receive FIFOs
    • Physical Layer
      • 100Base-Tx and 10Base-T
    • Easy to Use
      • Low Power Features
      • Status LEDs
      • Software configuration
• Two 9 pin male D-Sub connectors
  • Software-configurable RS-232/422/485 serial ports
    • 16550 compatible UARTs for high-speed
    • Termination resistors for RS-422/485
• 9 pin female D-Sub connector
  • Two USB 1.1 Ports
    • Supports both 12Mb/s (full-speed) and 1.5Mbs (lowspeed) peripherals
    • 500 mA @ 5 Vdc provided per port
• 15 pin female high density D-Sub Monitor connector &
  44 pin female high density D-Sub TTL Panel connector
  • SVGA and TTL Panel
    • Resolution up to 1920 x 1440 pixels with 32K colors
    • VGA, SVGA, XGA, SXGA, UXGA
    • Up to 16 million colors
    • High-performance memory
      • 2MB to 32MB of shared SDRAM memory
• 25 pin female D-Sub connector
  • multiPort function connector
    • Parallel port
      • SPP, PS/2 bi-directional, EPP & ECP
    • Advanced Digital I/O (aDIO^™)
      • One 8-bit port programmable as input or output
      • Eight bit-programmable I/O with Advanced Digital Interrupt Modes
        • Event Mode Interrupt generates an interrupt when any input bit changes
        • Match Mode Interrupt generates an interrupt when input bits match a preset value
        • External Strobe Mode latches 8 data inputs and generates and interrupt
      • Two Strobes can be configured as readable inputs.
    • Floppy controller interface - Interfaces only with RTD's XK-CM49 multiPort Floppy Drive and Cable Kit
• 6 pin female mini-DIN connector
  • PS/2 Mouse port
• 6 pin female mini-DIN connector
  • keyboard port
• Hardware Reset Button

• EIDE Controller
• 32-pin DIP socket for Solid State Disk support:
  • Standard: DiskOnChip 32MB to 1 GB
  • On request: MCSI "Prom Disk", EPROM to 1MB, Flash EPROM to 512 KB,
    Atmel Flash to 512 KB, SRAM to 512 KB, & NOVRAM to 512 KB

• IDAN Pinout and Dimensional Drawings
• CML36786HX Hardware Manual
• CMT36106 Hardware Manual
• Drivers and Example Programs
• Software Manual(s)
• Application Notes

Copyright © 1998-2006 RTD Embedded Technologies, Inc.  All rights reserved.