CML27686 Geode™ 333MHz PC/104-Plus cpuModule - RTD Embedded Technologies, Inc

PC/104-Plus Low Power AMD Geode™
HiRel cpuModule™ & Controller with Advanced Digital I/O (aDIO)
CML27686HX333HR
Serial Ports, USB, Ethernet, PWM, IEI, SSD, aDIO, ISA & PCI Expansion Bus

Standard Operating Temperature -40° to +85°C

	Featuring Fail Safe & Quick Boot Modes
COM2			COM1
			Ethernet 100Base-Tx 10Base-T 8-bit Dig I/O (a2DIO™)
USBs			Utility: Keyboard Speaker Battery Reset
	Power	18-bit Digital I/O (aDIO™) PS/2 Mouse
	CML27686HX333HR-128 cpuModule™ Solder-tail expansion bus, right-angle I/O & feed-thru I/O connectors available on request
ISA (PC/104)			PCI (PC/104+)
	with standard Heatsink installed

	Rugged Fanless IDAN™ & HiDAN™ Configuration -40°C to +85°C

333 MHz @ 2.2Vdc Geode^™ MMX^™
32 & 128Mbytes SDRAM
4 Bus Master Add-on Cards Supported
Rugged Passive Heatsink
Passive Structural Heatsink in
IDAN^™ and HiDAN^™System Configurations
27-bit Digital I/O Ports with Advanced Digital Interrupt Modes, PWM & IEI
3.3V or 5V PCI bus signaling
32 Pin SSD Socket Supports: SRAM, Flash, EPROM & 32MB DiskOnChip
- 32MB DiskOnChip installed unless otherwise specified
RS-232/422/485 Port
Two USB (Universal Serial Bus) Ports
INTEL 82559 Fast Ethernet
10BASE-T and 100BASE-Tx
Full Duplex support
PS/2 Mouse Port
Keyboard Port
Speaker Port
RTD Enhanced Award BIOS with Quick Boot Mode Installed
Nonvolatile storage of CMOS settings
Mating Connectors
- Standard 4-pin 0.1" DIL header (PS/2 Mouse)
- Standard 10-pin 0.1" DIL header (Utility, a2DIO™, Ethernet, COM1, COM2, USB)
- Standard 12-pin 0.1" DIL header (Power)
- Two standard 12-pin 2mm SIL headers (aDIO™)

Features:

Complete PC-compatible motherboard
Stackable 104-pin PC/104 AT bus
Stackable 120-pin PC/104-Plus PCI bus
- 4 Bus Master Add-on Cards Supported
Math coprocessor
16KB internal cache
Boot Block Flash BIOS with Quick Boot Option
Nonvolatile configuration without battery
Y2K compliant real time clock (external battery required)
Watchdog timer
7 fully functional DMA channels, including non auto-initialize mode
15 interrupt channels
3 timer/counter channels

32-pin DIP socket for Solid State Disk support:
- Standard: 32MB DiskOnChip installed unless otherwise specified
- On request: MCSI "Prom Disk", EPROM to 1MB, Flash EPROM to 512 KB,
  Atmel Flash to 512 KB, SRAM to 512 KB, & NOVRAM to 512 KB
I/O:

Software-configurable RS-232/422/485 serial port
- 16550 compatible UARTs for high-speed
- Termination resistors for RS-422/485
27 Digital I/O, Pulse Width Modulator (PWM) & Incremental Encoder Interface (IEI)
- 18 Advanced Digital I/O (aDIO^™ 20-pin connector)
  - One 8 bit port - port programmable as input or output
  - One 8 bit port - bit programmable I/O with Advanced Digital Interrupt Modes
    - Event Mode Interrupt generates an interrupt when any input bit changes
    - Match Mode Interrupt generates an interrupt when input bits match a preset value
    - External Strobe Mode latches 8 data inputs and generates and interrupt
  - Two Strobes can be configured as readable inputs.
- 9 Advanced Digital I/O (a2DIO^™ 10-pin connector)
  - Mode 1: One 8 bit programmable I/O with Advanced Digital Interrupt Modes
    - Event Mode Interrupt generates an interrupt when any input bit changes
    - Match Mode Interrupt generates an interrupt when input bits match a preset value
    - External Strobe Mode latches 8 data inputs and generates and interrupt
    - One Strobe can be configured as readable input.
  - Mode 2: One 16 bit Pulse Width Modulator (PWM)
    - Periodic signal with an adjustable width of 60ns to 2ms
    - 33 MHz master clock allows 30ns pulse width adjustment
    - Complimentary output for single ended or differential modulation
  - Mode 3: One Incremental Encoder Interface
    - Quadrature signal inputs determine direction and distance
    - 16 MHz count rate
    - Software expandable 8-bit register
    - Index input provides absolute encoder capability (external clear bit)
INTEL 82559 Ethernet
- Ethernet Controller
  - Intel 82559ER Fast Ethernet PCI Controller
  - Integrated 3KByte Transmit and 3Kbyte Receive FIFOs
- Physical Layer
  - 100Base-Tx and 10Base-T
- Easy to Use
  - Low Power Features
  - Status LEDs
  - Software configuration
Two USB 1.0 (Universal Serial Bus) Ports
- Supports both 12Mb/s (full-speed) and 1.5Mbs (lowspeed) peripherals
- 500 mA @ 5 Vdc provided per port
PS/2 Mouse port
Utility port
- PC-AT compatible keyboard port
- Speaker (0.1W output) port
- Hardware Reset input
- Battery input for Real Time Clock
Power I/O
- Access to PC/104 Bus power pins
  - Gnd, ±12 & 5 VDC
- Access to PC/104-Plus Bus pins
  - Gnd, ±12, 5 & 3.3 VDC

Software:

RTD Enhanced Award BIOS with built-in SETUP and Quick Boot Mode Installed
Fail Safe Boot Mode using embedded ROM-DOS
Includes ROM-DOS , SSD software, utilities, and example programs.
Compatible with all x86 operating systems:

MS-DOS, ROM-DOS, PC-DOS
Windows (98, NT 4.0, 2000, XP, and XP Embedded)
Linux (desktop and real-time versions)
RTOSes such as QNX, VxWorks, and Windows CE

Physical Attributes:

Dimensions
- Board Size: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W)
- I/O Ext: 12.70 mm E_Lx 79.38 mm E_W (0.350 in E_Lx 3.125 in E_W)
Weight: Approximately 0.13 Kg (0.28 lbs.)
Operating Temperature: -40° to +85°C: 90% humidity non-condensing
Storage Temperature: -55° to +125 °C
MTBF: 115,000 hours typical
Power requirements 333 MHz: 7.0 W @ 5 VDC typical

Recommended Accessories:

Documentation and Software Downloads:

Ordering Information

Part Number	Description	OEM Price
CML27686HX333HR-32	32MB SDRAM cpuModule™	$ 1245
CML27686HX333HR-128	128MB SDRAM cpuModule™	$ 1345

* 32MB DiskOnChip installed unless otherwise specified

Third Party Information

CPU Guide PC104 Menu Accessories Systems Development Kits Home