Featuring Fail Safe, USB & Quick Boot Modes
SVGA			COM2
TTL Flat Panel			COM1 multiPort: Parallel Floppy(*) aDIO™
2 USB			Utility: Keyboard Speaker Battery Reset
	Power	EIDE              PS/2 Mouse
	CMi37786HX733HR-256 cpuModule™ (*)  Interfaces only with RTD modified floppy drive Solder-tail expansion bus, right-angle I/O & feed-thru I/O connectors available on request
ISA (PC/104)			PCI (PC/104+)
	Standard Mini Fan & Rugged Passive Heatsink
	Rugged Fanless IDAN® & HiDAN Configuration -40°C to +85°C

• 733 MHz, 1.05Vdc VIA^™ Eden^™ with thermal throttling
• 128, 256 & 512 Mbytes SDRAM
• 4 Bus Master Add-on Cards Supported 
• Mini Fan Heatsink with Auto Fan control
  Passive Heatsinking on request
• Passive Structural Heatsink & Heatpipes in IDAN^® and HiDAN^™ System Configurations
• RTD Enhanced Award BIOS with ACPI, Quick Boot and USB Boot
• Nonvolatile Configuration
• multiPort with Parallel Port, Floppy Drive Interface and 18-bit Digital I/O Port with Advanced Digital Interrupt Modes
• AGP S3 Savage SVGA controller with TTL Flat Panel output
• 64-bit AGP Hardware graphics-accelerator 2-32 Mbytes selectable shared video memory
• DirectX & OpenGL 3D Accelerator
• 3.3V or 5V PCI bus signaling
• 32 Pin SSD Socket Supports: DiskOnChip, SRAM, Flash & EPROM
• Two RS-232/422/485 Ports
• Two USB (Universal Serial Bus) Ports
• EIDE Controller with UltraDMA 33/66/100
• PS/2 Mouse Port
• Keyboard Port
• Speaker Port
• Mating Connectors
  • Standard 4-pin 0.1" DIL header (PS/2 Mouse)
  • Standard 12-pin 0.1" DIL header (Power)
  • Standard 10-pin 2mm DIL header (Utility, COM1, COM2, SVGA, USB)
  • Standard 26-pin 2mm DIL header (multiPort)
  • Standard 30-pin 2mm DIL header (Panel)
  • Standard 44-pin 2mm DIL header (EIDE)

Features:

• Complete PC-compatible motherboard
• Stackable 104-pin PC/104 AT bus
• Stackable 120-pin PC/104-Plus PCI bus
  • 4 Bus Master Add-on Cards Supported
• Supports MMX and SSE instructions
• Math coprocessor
• 128KB L1 and 64KB L2 internal cache
• Boot Block Flash BIOS with Quick Boot Option
• Boot from USB Device
• Nonvolatile configuration without battery
• Y2K compliant real time clock (external battery required)
• Watchdog timer
• 7 DMA channels
• 15 interrupt channels
• 3 timer/counter channels
• Advanced Configuration and Power Interface (ACPI)
• ACPI 1.0 Compliant
• Supported power down modes: S1 (Power On Suspend), S4 (Hibernate), and S5 (Soft-Off)
• CPU Clock Throttling and Clock Stop for C0 to C3 Support
• Also supports APM 1.2 for legacy power management
• Advanced Thermal Management
  • Thermal Throttling reduces clock speed to prevent thermal runaway
  • Auto Fan Control only runs fan when needed
  • SMBus Temperature Monitor for CPU and board temperature
• 32-pin DIP socket for Solid State Disk support:
  • Standard: DiskOnChip 32MB to 1 GB
  • On request: MCSI "Prom Disk", EPROM to 1MB, Flash EPROM to 512 KB,
    Atmel Flash to 512 KB, SRAM to 512 KB, & NOVRAM to 512 KB

I/O:

• Pro Savage4 AGP Graphics controller Super VGA CRT and TTL Flat Panel interface
  • Resolution up to 1920 x 1440 pixels with 32K colors
  • VGA, SVGA, XGA, SXGA, UXGA
  • Up to 16 million colors
  • High-performance memory
    • 2MB to 32MB of shared SDRAM memory
• Software-configurable RS-232/422/485 serial port
  • 16550 compatible UARTs for high-speed
  • Termination resistors for RS-422/485
• multiPort function connector
  • Parallel port
    • SPP, PS/2 bi-directional, EPP & ECP
  • Advanced Digital I/O (aDIO^™)
    • One 8-bit port programmable as input or output
    • Eight bit-programmable I/O with Advanced Digital Interrupt Modes
      • Event Mode Interrupt generates an interrupt when any input bit changes
      • Match Mode Interrupt generates an interrupt when input bits match a preset value
      • External Strobe Mode latches 8 data inputs and generates and interrupt
    • Two Strobes can be configured as readable inputs.
  • Floppy controller interface - Interfaces only with RTD's XK-CM49 multiPort Floppy Drive and Cable Kit
• Two USB 1.1 (Universal Serial Bus) Ports
  • Supports both 12Mb/s (full-speed) and 1.5Mbs (lowspeed) peripherals
  • 500 mA @ 5 Vdc provided per port

• UltraDMA-100 / 66 / 33 Master Mode PCI EIDE Controller

  • Transfer rate up to 100MB/sec using UltraDMA
  • Increased reliability using UltraDMA-66 transfer protocols
  • Increased performance using UltraDMA-100 mode 5
  • Support ATAPI compliant devices including DVD drives
  • 48-bit LBA support for hard drives larger than 137GB
• PS/2 Mouse port
• Utility port
  • PC-AT compatible keyboard port
  • Speaker (0.1W output) port
  • Hardware Reset input
  • Battery input for Real Time Clock
• Power I/O
  • Access to PC/104 Bus power pins
    • Gnd, ±12 & 5 VDC
  • Access to PC/104-Plus Bus pins
    • Gnd, ±12, 5 & 3.3 VDC

• RTD Enhanced Award BIOS with built-in SETUP, USB Boot and Quick Boot Mode Installed
• Fail Safe Boot Mode using embedded ROM-DOS
• Includes ROM-DOS , SSD software, utilities, and example programs.
• Compatible with all x86 operating systems:
• MS-DOS, ROM-DOS, PC-DOS
• Windows (98, NT 4.0, 2000, XP, and XP Embedded)
• Linux (desktop and real-time versions)
• RTOSes such as QNX, VxWorks, and Windows CE

• Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
• Weight: Approximately 0.13 Kg (0.28 lbs.)
• Standard Operating Temperature: -40° to +75°C: 90% humidity non-condensing
      Extended operation to +85°C available on request
• Storage Temperature: -40° to +85°C
• MTBF: 110,000 hours typical
• Power requirements   733 MHz: 9.7 W @ 5 VDC typical

Recommended Accessories:

• Cable Kit XK-CM42
• Cable Kit XK-CM49 (multiPort Floppy Drive)
• CMT3106 or CMT36106

Documentation and Software Downloads:

• Hardware Manual
• Drivers and Example Programs
• Software Manual(s)
• Application Notes

Ordering Information

Third Party Information     IDAN® Systems

CPU Guide     PC104 Menu     Accessories     Development Kits     Home

Copyright © 1998-2006 RTD Embedded Technologies, Inc.  All rights reserved.