cpuModule

Intel® Celeron® 140000 HX Series cpuModule™ CME HiRel Configurations Pentium® III Class 786HX Intel® Celeron® with 256MB & 512MB SDRAM Standard Operating Temperature: -40º to +85º C
Intel® Celeron® with ACPI & APIC 4 Bus Masters Supported Surface Mount SDRAM 256MB & 512MB Passive or Active Heatsink	SERIAL PORTS: Software selectable 16C550 RS-232/422/485 USB PORTS: Universal Serial Buses with inline connector interface multiPort: BIOS Selectable Parallel port (SPP, ECP & EPP), Advanced Digital I/O (aDIO™) with event/match interrupt modes and bit masking capability, or floppy drive interface. ETHERNET (Eth): 100Base-Tx & 10Base-T SSD: 32 pin socket for SRAM, Flash, EPROM & 32 or 64 MB DiskOnChip DRIVE INTERFACES: EIDE Controller with UltraDMA 33/66/100 VIDEO: SVGA display controller AUDIO: AC97 Audio support BUS MASTERING: 4 Bus Master PCI Add-on Cards Supported BIOS: RTD Enhanced BIOS with Fail Safe, USB & Quick Boot Modes
PC/104-Plus	MHz \| Serial \| USB \| Eth \| aDIO \| EIDE \| SSD \| SVGA \| Watts	OEM*
CME147786HX650HR-256	650 2 2 1 18 1 1 1 9.0	$ 1995
CME147786HX650HR-512	650 2 2 1 18 1 1 1 9.0	$ 2395

*Subject to set-up charges.
CME available with PC/104 ISA Expansion Bus Connector Only (PCI Connector Removed).
Specify CME146786 instead of CME147786
32MB DiskOnChip installed unless otherwise specified

5000 Series cpuModules™ CMi HiRel Configurations 32-Bit 66 / 100 MHz 80x86DX with 16MB DRAM Operating Temperature: -40º to +85º C
Intel® 486 Surface Mount DRAM 16MB Passive Heatsink	SERIAL PORTS: Software selectable 16C550 RS-232/422/485 SSD: 32 pin socket(s) for SRAM, Flash & EPROM DRIVE INTERFACES: IDE and Floppy Drive Controllers BIOS: RTD BIOS with Fail Safe & Quick Boot Modes
PC/104	Speed \| Serial \| SSD \| IDE \| Floppy \| Watts	OEM*
CMi5486DXLC66HR-16	66MHz 2 2 1 1 4.5	$ 1545
CMi5486DXLC100HR-16	100MHz 2 2 1 1 5.6	$ 1545