Features:

• Autonomous SmartCal™ - Software Independent Auto-Calibration

  • Texas Instruments TMS320F2812 DSP performs analog auto-calibration onboard

  • 2K EEPROM to save/restore calibration values

  • Self-calibrates in under 300 msec

  • Does not use any host resources during calibration

  • Autonomous SmartCal™ initiated by a single driver function

  • Requires no special software libraries

• 3.3V and 5V PCI signaling compatible

• Bus Mastering

• High Reliability Temperature Range

• -40°C to +85°C Operation

• High-speed Analog Inputs

• 8 differential or 16 single-ended channels

• 12-bit, Successive Approximation Register A/D
  with internal Sample and Hold circuitry

• 0.8 µs conversion time (1.25 MHz throughput)

• ±5, ±10, 0 to +10V Analog Input Ranges

• Programmable binary gains of 1, 2, 4, 8, 16, 32 & 64

• 1K entry Channel-Gain Scan Memory with Skip Bit

• High-speed Data Paths

• 33 MHz, 32-Bit PCI Bus

• Multichannel Buffered Serial Port (McBSP)

• 500KHz sine wave generator

• DMA

  • 1K or 8K A/D FIFO

  • 1K or 8K D/A FIFO (x2)

• Bus master transfer

• Versatile Triggering

• Software, Pacer Clock, Burst Clock, and External Triggers

• Pre-, Post-, and About-Trigger Modes

• Random scan, burst and multiburst using channel-gain table

• Two fast analog outputs

• 12-bit resolution
• Typical 5µs settling time (+/-10V range)
• ±5, +5, ±10, & +10V output ranges
• 5mA output current
• Digital I/O
• 3 Data-marker Input Bits
• 1K or 8K byte digital input buffer
• 8 bit-programmable digital I/O lines and an 8-bit programmable port
• Advanced digital interrupts
• -12/+24mA output drive currents
• Timers and Counters
  • Three 16-bit 8 MHz timer/counters available for User applications.
• Easy to Use
• Programmable Interrupt Source
• Single +5V power supply
• Software
• Real-mode DOS  examples with source code.
• Windows 98/NT/2000/XP driver with Visual C++ examples, source code, and API documentation.
• Linux driver and examples with full source code and API documentation
• Mating Connectors
• Standard 26-pin 0.1" DIL header (Analog)
• Standard 40-pin 0.1" DIL header (Digital I/O)
• Standard 10-pin 0.1" DIL header (SyncBus)
• Standard 10-pin 0.1" DIL header (McBSP)

Physical Attributes:

• Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W)
• Weight: Approximately 0.10 Kg (0.22 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125°C
• Power requirements 4.0 W @ 5 VDC typical

Documentation and Software Downloads: