DM6430HR-1 dataModule®

Rugged IDAN™ Configuration

I/O Assignments

Features:

• High-resolution Analog Inputs
• 16 Single-ended/8 Differential inputs
• 16-bit A/D with matched internal Sample and Hold
• 10µs conversion time (100kHz throughput)
• ±10V Input Range
• Programmable gains of 1, 2, 4, 8
• 1K entry Channel-Gain Scan Memory with Skip Bit
• High-speed Data Paths
• True AT 16-bit bus to A/D and D/A
• 1K or 8K Sample Buffer on A/D Converter
• DMA transfers
• Versatile Triggering
• Software, Pacer Clock, and External Triggers
• Pre-, Post-, and About-Trigger Modes
• Random Scan, Burst, and Multi-burst using Channel-Gain Table
• Two fast analog outputs
• 16-bit resolution
• 10µs settling time (full scale)
• ±10V output range
• 5mA output current
• Digital I/O
• 1K or 8K byte Digital Input Buffer
• 8 bit-programmable digital I/O lines with Advanced Digital Interrupts
• 8 port-programmable digital I/O lines
• -12/+24mA output drive currents
• Timers and Counters
• Programmable high-speed sample counter
• Two 16-bit timer/counters, on-board 8 MHz clock
• Programmable Interrupt Source
• Mating Connector
  • Standard 50-pin 0.1" DIL header

Physical Attributes:

• Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W)
• Weight: Approximately 0.15 Kg (0.34 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125 °C
• Power requirements:  3.5 W  @ 5 VDC typical

Recommended Accessories: