DM6810HR
 PC/104 AT-bus dataModules®
opto-22 Compatible Digital I/O

Operating Temperature -40° to +85°C

DM6810HR dataModule®

Rugged IDAN® Configuration

Module Versions:

		Digital I/O type
	Bus type	Port Programmable	Bit Programmable
DM6810HR	AT	-	48
DM6812HR	AT	24	24

Features:

•  Diode protected digital I/O lines
  • 48-bit programmable
• AT-bus interface
• Jumper-selectable hardware interrupt
  IRQ 2/9, 3, 4, 5, 6, 7, 10, 11, 12, 14, 15
• Standard outputs:
  -8mA / +8mA (source / sink)
• Direct connection to opto-22 I/O system modules
• Pull-up/pull-down resistors on each bit or each port
• Three 16-bit timer/counters, on-board 8 MHz clock
• Compatible with DMR & DOP expansion boards
• Mating Connectors
  • Two Standard 50-pin 0.1" DIL headers
     

• Includes software packages for the following Operating Systems:
  • DOS
  • Windows 98, NT4.0, 2000, XP/XPe
  • Linux 2.4.x and 2.6.x
• Source code provided for easy porting to other platforms, including RTOSes.
• Data acquisition toolkits such as LabVIEW and MATLAB may be used with the Windows drivers.
• Example programs with source code provide a starting point for developing custom applications.
   

• Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W)
• Weight: Approximately 0.10 Kg (0.22 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125°C
• MTBF: 4,957,167 hours
• Power requirements 1.19 W @ 5 VDC typical
   

• XT50: 3 foot, 50-pin, twisted-pair cable
• TB50: 50-pin screw terminal board
• XB50: 50-pin screw terminal board with prototyping area
• DMR24: mechanical relay output board
• DOP24: Opto-isolated input board
   

• DM6810 Hardware Manual
• Drivers and Example Programs
• Software Manual(s)