SPM176431ER 1GHz PC/104-Plus dspModule - RTD Embedded Technologies, Inc.

SPM176431ER1000 Coprocessor
PC/104-Plus dspModule™
TMS320C6416T based Industrial DSP Module
Bus master or target only PCI Interface

Operating Temperature: -20º to +70º C

	PCI Expansion Bus
Texas Instruments TMS320C6416T Power		COM1
		McBSP/ aDIO
		COM2
JTAG		Audio
JTAG

	ISA Expansion Bus
	SPM176431ER1000-256 dspModule™

	with standard heatsink installed

	Rugged IDAN® Configuration

Features:

3.3V and 5V PCI signaling compatible
1 GHz TMS320C6416T DSP
8000 MIPS operation
Linearly Addressable PCI Interface
Eight 32-Bit Instructions/Cycle
1.0 ns cycle time
32, 128 & 256 MB SDRAM
800 MB/s memory transfer rate
4 Mbytes FLASH
All DSP resources accessible
from the PCI bus
VLIW instruction device
Watch-Dog Timer
Bus master or target only (Switch Enabled)
Complete High performance DSP Co-processor module
Stackable 104-pin AT expansion bus
Stackable 120-pin PCI expansion bus for use with PC/104-Plus and PCI-104 modules
Multi channel Buffered Serial Port (McBSP) (max. 75Mbit/s )
Boot Mode: PCI, or Flash Boot Mode (switch Enabled ROM Boot Mode (Switch Enable)
All resources of the DSP can be accessed from the PCI bus
TMS320™ DSP ALGORITHM STANDARD

Mating Connectors
- Standard 14-pin 0.1" DIL header (JTAG)
- Standard 12-pin 0.1" DIL header (Power)
- Standard 10-pin 0.1" DIL header (Audio)
- Standard 10-pin 0.1" DIL header (McBSP)
- Standard 10-pin 0.1" DIL headers (COM1 & COM2)

I/O:

Processor
Software Selectable I/O Port
- Multi channel Buffered Serial Ports (McBSP):
  - Buffered ASynchronous Memory Interface of the DSP
  - High speed data transfer device between the DSP and the analog interface
  - TI/EI, MVIP, SCSA, ST bus, AC97 SPI Compatible
- Advanced Digital I/O (aDIO™) Interrupt on Match, Event
  - Seven bit direction programmable I/O with Advance Digital Interrupt Modes
    - Event Mode Interrupt generates an interrupt when any input bit changes
    - Match Mode Interrupt generates an interrupt when input bits match a preset value
    - Debounce Filter for direct connection to mechanical switches
    - Diode protected
AC97 Audio Support
- SoundBlaster Compatible
- Selectable Headphone or Line level output
- Line level input
- Microphone input
Software-configurable RS-232/422/485 Serial Port
- 16550 compatible UARTs for high-speed
- Termination resistors for RS-422/485
JTAG emulator connector
- Boundary-Scan-Compatible

Software:

Supported under the following operating systems:
- DOS (DPMI32)
- Windows 98/NT4/2000/XP
- Linux (2.4 and 2.6 kernels)
Includes the RTD dspFramework, a suite of libraries and example programs to simplify application development. Key features of the RTD dspFramework include:
- Matching host-side and DSP-side libraries.
- Standard interfaces for passing messages between the DSP and the host system.
- Ability for the host to call DSP functions.
- Support for single and multi-threaded applications (DSP/BIOS).
- Support for on-board hardware (Serial Ports, Audio, Digital I/O, etc).
- DSP applications can be downloaded through the PCI bus, or programmed into the on-board flash.
- Modular design and full source code makes it possible to modify and extend the framework.
Source code, example programs, and API documentation are included for all supported platforms.
TI Code Composer Studio required to develop and compile DSP applications.

Physical Attributes:

Documentation and Software Downloads:

Part Number	Description	OEM Price
SPM176431ER1000-32	DSP Module - 32 MB SDRAM dspModule™	$1395
SPM176431ER1000-128	DSP Module - 128 MB SDRAM dspModule™	$1495
SPM176431ER1000-256	DSP Module - 256 MB SDRAM dspModule™	$1695