 |
| GPS18190HR GPS Carrier Module |
| |
 |
| GPS18190-BD970 with Trimble BD90
installed |
Features
- PCI-104 GPS Satellite Receiver Carrier Module with PCI UARTs for
Trimble BD970 GPS receiver for Automotive and Mobile Systems
- Marker Input available for precision time stamping
- Time stamp or position stamp on event inputs
- 1 PPS available externally
- High speed serial communications
- CPU communication to the GPS at up to 460,800 baud
- CPU UART interface GPS COM1, COM 2, and COM3
- CPU UART interface external RS-232/422/485 connector
- Jumper to select GPS COM1 or COM 2 be directed to external
RS-232/422/485 connector
- Jumper to select external connector mode RS-232 or RS-422/485
- Jumper to select GPS COM3 be directed to CAN bus
- GPS USB external connector
- GPS 10/100 Mbps Ethernet external connector
Description
The GPS18190HR is a low-power wide operating temperature range GPS
receiver carrier module for use with the Trimble BD970. This receiver will
work reliably in a variety of installations. Integrated on the GPS18190HR
board are four complete PCI serial ports that can be flexibly
configured with jumpers to communicate with GPS or I/O connectors. The GPS
antenna connects directly to the BD970. Starter kits are available. In IDAN® installations the antenna connection is brought to the
front side of the IDAN frame.
Trimble Module Features
- Trimble BD970 GPS Module
- 220 Channels
- GPS Simultaneous L1 C/A, L2E, L2C, L5; GLONASS Simultaneous L1
C/A, L1 P, L2 C/A (GLONASS M Only), L2 P; SBAS Simultaneous L1 C/A,
L5; GIOVE-A BOC, E5A, E5AltBOC; GIOVE-B CBOC, E5A, E5AltBOC
- Advanced Trimble Maxwell 6 Custom Survey GNSS Technology with a high
precision multiple correlator for GNSS pseudo range measurements
- Low now GNSS Carrier phase measurements with <1 mm precision in a
1Hz bandwidth
- Proven Trimble low elevation tracking technology
- Initialization time <10 seconds typical, with a reliability of
>99.9%
- Multiple interfaces to GPS module:
- 1 USB port
- 1 CAN port
- 1 LAN Ethernet port: 10/100 Base T, all function performed
through a single IP address including GUI access and raw data
streaming. Support for HTTP, NTP Server, NMEA, GSOR, CMR over TCP/IP
or UDP, NTripCaster, NTripServer, NTripCLient, mDNS/uPnP Service
discovery, Dynamic DNS, eMail alerts, Network link to Google Earth,
and support for external modems via PPP
- 3 RS232 port with baud rates up to 115000
- 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz and 50 Hz positioning outputs
- Reference outputs: CMR, CMR+, RTCM 2.1, 2.2, 2.3, 3.0, 3.1
- Navigation Outputs: ASCII: NMEA-0183 GSV, AVT, RMC, HDT, VGK, VHD,
ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS and
Binary: Trimble GSOF
- Control Software: HTML (IE 7.0 or later), Firefox (3.5 or later),
Safari 4.0, Opera 9, Google Chrome
- Operating Temperature: -40 to +75 C
- Antennae connector MMCX receptacle
Software
- GPS data available to CPU via three COM ports
- GPS data available to external devices via serial ports, USB port,
Ethernet, or CAN bus
- PCI COM port drivers available for:
- DOS (DPMI32)
- Windows XP and Windows 7
- Linux 2.6 (drivers built into kernels >2.6.9)
- Includes RTD GPS Software
- For DOS, Windows, and Linux
- Full source code provided
- Includes sample code reading and interpreting GPS data
- Trimble GPS software when purchasing optional module
- USB Configuration Software
- Ethernet using Web Browser
- BDxxx Configuration Toolkit
Physical Attributes
- Dimensions
- Length: 3.775 inches (95.885 mm)
- Width: 4.570 inches (116.078 mm)
- Stand-off Height: 0.600 inches (15.240 mm)
- Size: 107mm L x 96mm W x 15mm H (4.2"L x 3.8"W x 0.6"H)
- Weight: Approximately 0.07 Kg (0.16 lbs.)
- Operating Temperature: -40° to +85°C: 90% humidity non-condensing
- Storage Temperature: -55° to +125 °C
- MTBF: 2,602,250 hours
- Power Requirements: 0.5 W @ 5 VDC typical
- Note: Specifications for GPS18190HR carrier module only.
Specifications for GPS module may vary.
Recommended Accessories
Documentation and Downloads
Ordering Information
| Part Number |
Description |
Value
OEM |
|
GPS18190HR |
Carrier module only. Trimble engine
not installed. |
$ 498 |
|
GPS18190HR-xxxx |
Carrier module with Trimble BD970
module installed.
The BD970 is available in a variety of configurations. |
RFQ |
(RFQ) - Request for Quote required. Pricing and Delivery
available at sales@rtd.com |
