EFM104HR
PC/104 Data / Fax Modem Peripheral Module 
Fully Integrated Embedded 56K baud
ISA Expansion Bus

-40° to +85°C Operation

---

			RJ-11
Digital I/O			Base Address Set
		ISA (PC104)
	EFM104HR Peripheral Module
	Rugged IDAN® Configuration

Features:

• Multitech MT5634SMI-ITP-92 Socket Modem

• ITU-T V.92 (56kbps) Data Modem

• ITU-T V.34 (33.6kbps) Fax Modem

• Auto-negotiation with slower connections

• V.44 and V.42bis data compression

• V.42 Error Correction

• Telephony/TAM support

• Enhanced AT Command Set

• Standard 16C550 UART Interface

• Jumper-selectable base address and IRQ

• 16TTL digital I/O (8 inputs, 8 outputs)

Applications:

• Internet node applications

• Vending machines

• Industrial and medical systems

• Distributed communication systems

• Remote data logging nodes

Description:

The EFM104 provides a direct and reliable connection to wired telephone networks.  It supports modern ITU Data/Fax protocols, making it interoperable with most data and fax systems.  The onboard Multitech Socket Modem module has Telecom approval in more than 50 countries and holds the following certifications: UL1950, EN6050, CSA 950, AS 3260, CCC, FCC Part 15 (Class B), Canada (Class B), EN55022 (Class B), EN55024.

This board is especially designed to operate over the full -40 to +85C temperature range commonly required in industrial and outdoor installations. Integrated on your EFM104 board is a complete 16C550 compatible serial port that can be flexibly configured with jumpers for any standard COM port address or any free address space. Both XT and AT interrupts are supported. The control registers of the board are overlaid in Base Address + 400h. The onboard 16 digital I/O lines can be used for general purpose digital control with TTL signal levels. The lines are grouped into two 8-bit ports. The input port lines are pulled low with a 10K resistor. The digital I/O connector is compatible with the RTD GSM20 Wireless GSM modem pinout.

I/O:

• One General Purpose Digital I/O port

  • 8 TTL Outputs

  • 8 TTL Inputs

• Standard RJ-11 Connector

Software:

• Modem uses standard COM port interface and AT command set
• Compatible with all x86 operating systems:
  • MS-DOS, ROM-DOS, PC-DOS
  • Windows (98, NT 4.0, 2000, XP, and XP Embedded)
  • Linux (desktop and real-time versions)
  • RTOSes such as QNX, VxWorks, and Windows CE
  • Note: Drivers may be required to use non-PC hardware features.

Physical Attributes:

• Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)

• Weight: Approximately 0.10 Kg (0.22 lbs.)

• Operating Temperature: -40° to +85°C: 90% humidity non-condensing

• Storage Temperature: -55° to +125 °C

• Power requirements: 1.5 W @ 5 VDC typical

Ordering Information