RTD Embedded Technologies, Inc.
PC104 and PC104 plus
embedded computers
Home Page  RTD
 Product
 Menu  Single
 Board
 Computers  Digital
 Signal
 Processing  Frame Grabber
 SVGA
 Panel
 DVI
 MPEG  Bluetooth
 WLAN 802.11
 Cellular
 GSM
 GPRS
 GPS-Rail  Ethernet
 Quad Serial
 CAN Bus
 USB 2.0  Modem
 PCMCIA
 GPS
 Hard Drives
 Power Supplies
 IDE & Floppy  Up to 16 Bit Resolution 
 8 differential or 16 single ended inputs 
 16-bit 200 kHz throughput outputs
 FIFO buffer
 Channel Gain Table
 Pacer & Burst Clocks 
 Programmable Gain   Bit Programmable 
 Opto-isolated 
 Timer/Counters
 Incremental Encoders  Servo Motor Control
 Synchro / Resolver  DC/DC
 Isolated
 Avionics  IDAN
 HiDAN
 HiDANplus  Return to
 RTD's
 Home Page

GPRS6055ER
PC/104 Cellular Modem Peripheral Module
Fully Integrated GSM GPRS 900/1800/1900 MHz GPRS Modem
ISA Expansion Bus

Operating Temperature -20° to +70°C
Restricted Operation  -25° to +75°C


                                                          
SIM
Card
- PC/104 Peripheral Module

 





Digital I/O


Antenna Connector
 
 

Base Address Set

 

 ISA (PC104)         

GPRS6055ER Peripheral Module
SK-GPRS6055ER  Starter Kit
GSM20  Integrated GSM Modem   GSM20 Adapter (GSM20 - Antenna)   GSM20 Antenna
       
GPRS6055ER, adapter cable, Cellular antenna,
and -2 includes External SIM card reader with cable
   
Rugged IDAN™ Configuration
Features:

Applications:

Description:

The GPRS6055ER wireless GPRS GSM modem uses the latest GPRS GSM technology to provide a direct and reliable data connection to stationary or GSM 900/1800/1900 mobile fields around the world. Network connectivity is achieved using the Siemens MC55 GPRS engine. This unit works in the 900MHz, 1800MHz or 1800MHz band.  RTD maintains in-house equipment for testing international cellular frequency standards.  The GPRS6055ER board is capable of standard GSM data connectivity or alternatively connecting with a fast GPRS data connection. In the case of standard GSM, 9600 kbps data rates are achieved, whereas with GPRS network services may reach up to 50kbps data rates depending on the free network bandwidth.

The GPRS6055 board includes a complete 16C550 compatible serial port that can be configured with jumpers for any standard COM port address or any free address space. Both XT and AT interrupts are supported. The control registers of the board are overlaid in Base Address + 400h.

Any standard dual band GSM antenna may be connected directly to the GPRS6055ER via on-board MCX connectors. The antenna should be connected to the GPRS6055ER using a flexible 50 Ohm antenna cable.

A standard +3V SIM-card socket is located on the bottom of the GPRS6055ER-1 module.  The GPRS6055ER-2 module provides an external SIM-card reader connected via a standard 10-pin 150mm long flat cable.

The temperature of the GPRS6055ER can be monitored using an on-board temperature sensor. This sensor will use status bits to indicate that the module is within a -20° to +70° C temperature range where the GSM engine is guaranteed to work reliably and will assist in the restricted operation range of -25° to +75° C.  The two 8-bit digital I/O ports may be used for general purpose TTL-level control. The input port pins have a 10K pull-down on all the 8 lines.

Advanced GSM tool software is provided with the GPRS6055ER product. This software package contains:

I/O:

Software: Physical Attributes:

Documentation and Software Downloads:

Ordering Information

Part Number

Description

OEM Price

GPRS6055ER-1

 Cellular Modem Module (on-board SIM-card reader)

RFQ

GPRS6055ER-2

 Cellular Modem Module (external SIM-card reader)

RFQ

SK-GPRS6055ER-1

 GPRS6055ER-1 module with adapter cable and antenna

RFQ

SK-GPRS6055ER-2

 GPRS6055ER-2 module with adapter cable and antenna

RFQ


(RFQ) - Request for Quote required.  Pricing and Delivery available at sales@rtd.com

Add-on Modules     IDAN™ Systems

Peripheral Module Menu    PC104 Menu     Accessories      Development Kits      Home

Copyright © 1998-2008 RTD Embedded Technologies, Inc.  All rights reserved.