CM17215HR and CM18215HR
PC/104-Plus and PCI-104 Dual Fiber Fast Ethernet
 Interface Peripheral Module

	MT-RJ Fiber     MT-RJ Fiber
PC/104-Plus CM17215HR Dual Fiber Ethernet Peripheral Module
	MT-RJ Fiber     MT-RJ Fiber
PCI-104 CM18215HR Dual Fiber Ethernet Peripheral Module
Rugged IDAN® Configuration

Features:

• Two Independent Fast Ethernet Connections
• 100 Mbps MT-RJ Fiber on each channel
• Uses Only One PCI Slot
• 3.3V and 5V PCI signaling compatible
• Full Duplex support
• Chipset
  • INTEL  82551IT PCI Fast Ethernet Controller
    • Integrated 3KByte Transmit and 3Kbyte Receive FIFOs
  • INTEL LXT973 10/100 Mbps Ethernet PHY
  • Avago 1300nm Multi-Mode Fiber Transceiver
  • PCI-to-PCI Bridge
  • Bus Mastering
  • Easy to Use
    • Low Power Features
    • Software configuration

I/O:

• Male MT-RJ Fiber connections
• PC/104-Plus: PCI stack through bus
• PC/104: 16-bit ISA stack through bus (CM17215HR only)

Software:

• DOS Drivers for NDIS, ODI, and Packet Driver specifications (only one channel) (included on companion CD) 
• Supports Windows 2000/XP/2003 (included on companion CD)
• Open source Linux drivers included in the kernel
• Drivers included in most modern operating systems. Check with the OS manufacturer.

Physical Attributes:

• Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
• Weight: Approximately 0.10 Kg (0.22 lbs.).
• Operating Temperature -40°C to +85°C: 90% humidity non-condensing
• Storage Temperature -55°C to +125°C
• MTBF: 379,695 hours
• Power Requirements: 4.9 W @ +5 VDC typical

Recommended Accessories: