CMT6118HR
PC/104 Single-slot CompactFlash® Controller
with External IDE connector and Floppy Controller

Operating Temperature -40° to +85°C

	IDE Connector
Configuration Jumpers		CF Socket with CF Retainer
Floppy Connector
	ISA (PC/104)
	CMT6118HR Single-slot CompactFlash® Controller
	Rugged IDAN™ Configuration

• Add up to 4 drives to a PC/104 stack
  • Single CompactFlash® socket supports +3.3V and +5V drives easily configurable with Master/Slave jumpers (Supports both Type I and Type II devices)
  • External 0.1" connector for connecting up to 2 IDE devices
  • Onboard floppy controller with 0.l" floppy connector
  • CF Socket with CF Retainer included
• IDE connector offers several options
  • Cable directly to any two IDE devices
  • Cable to a IDE devices on a peripheral module carrier board: CMT6104 or CMT36106
• Supports booting to CompactFlash, floppy, and IDE devices
• Interface decoded from PC/104 bus
• Supports rotating media drives or flash drives
• Drive activity LEDs
• No additional controller required

Description:

For general-purpose PCMCIA interfacing, please refer to the CM6109HR PC-Card (PCMCIA) Peripheral Module.

Physical Attributes:

• Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
• Weight: Approximately 0.07 Kg (0.16 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125 °C