Connector CN5 Pin Numbering
- Facing connector pins
- DIL40 0.1" male right-angle connector is standard
1 2 3 4 ... ... ... ... 37 38 39 40
Pin Descriptions
Pin Functions of CM112 and CM110 Pin Signal Function Notes 1 VDDSW Switched Panel Vdd 2 VBKLSW Switched Backlight supply 1 3 Vee(+) Positive Panel Bias 2 4 Vee(-) Negative Panel Bias 2 5 ENABKL Backlight Enable signal 6 GND 7 M Modulation clock 8 Blank*/DE Blank/Display enable 3 9 GND 10 LP Latch pulse 11 FLM First line marker 12 GND 13 SHFCLK Shift clock 14 GND 15 PNL0 Panel 0 16 PNL1 Panel 1 17 PNL2 Panel 2 18 PNL3 Panel 3 19 PNL4 Panel 4 20 PNL5 Panel 5 21 PNL6 Panel 6 22 PNL7 Panel 7 23 PNL8 Panel 8 24 PNL9 Panel 9 25 PNL10 Panel 10 26 PNL11 Panel 11 27 PNL12 Panel 12 28 PNL13 Panel 13 29 PNL14 Panel 14 30 PNL15 Panel 15 31 GND 32 PNL16 Panel 16 33 PNL17 Panel 17 34 PNL18 Panel 18 35 PNL19 Panel 19 36 PNL20 Panel 20 37 PNL21 Panel 21 38 PNL22 Panel 22 39 PNL23 Panel 23 40 GND Notes:
- 1) VBKLSW can provide switched +5Vdc or +12Vdc, as selected by jumper JP5.
- 2) The magnitude of bias voltages Vee(+) and Vee(-) are adjusted by trimpot R16.
- 3) The Blank*/DE pin may be connected to either M or LP signals from the VGA controller by positioning jumper JP7.
Copyright © 1998-2008 RTD Embedded Technologies, Inc. All rights reserved.