FPGA7800HR & FPGA8800HR
 PC/104-plus and PCI-104 dataModules®
User Application Specific FPGA Designs
(FPGA custom designed by RTD)

Operating Temperature -40° to +85°C

FPGA7800HR dataModule®

Rugged IDAN® Configuration

Features:

• Contact RTD with your project requirements for customer specific applications
  Off-the-Shelf FPGA Platforms designed by RTD
• PCI-bus interface with PLX9056 33 MHz, 32-bit PCI interface
• ISA-bus interface for dual bus access (FGPA7800HR only)
• Xilinx Spartan II XC2S200 FPGA with onboard configuration flash
  •  200,000 system gates
  • 57,344 bits of SRAM (fourteen 4096 bit blocks)
  • TTL compatible 3.3 Volt outputs, 5 Volt Tolerant Inputs
  • Dedicated Clock inputs
  • Programmable Configuration Flash
  • ISA bus connects directly to FPGA
  • Program through JTAG and PCI
• 48 diode protected I/O lines

• Two identical connectors with three configurations each

  • 25 I/O with grounds

• 8 MB SDRAM onboard
• Standard outputs:
  -24mA / +24mA (source / sink) on all I/O's
• Pull-up/pull-down resistors on each bit or each port programmable in FPGA
• On-board crystal oscillator clock
• Two 82C54 Counter/Timers (six 16-bit counter/timers)
• Mating Connector
  • Two Standard 50-pin 0.1 inch spaced 2 x 25

• FPGA programming by RTD designed to your specifications
• Staff of experienced VHDL FPGA designers
• Full documentation
• Example software (Windows, DOS, Linux)

• Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W)
• Weight: Approximately 0.10 Kg (0.22 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125°C
• Power requirements 1.5 W @ 5 VDC typical