SPM176430ER1000 Coprocessor
PC/104-Plus
dspModule™
TMS320C6416T based Industrial DSP Module
Bus master or target only PCI Interface
-20° to +70°C Operation
|
|
PCI
Expansion Bus
|
|
|
Texas
Instruments TMS320C6416T
Power
|
|
SyncBus
|
|
McBSP
|
|
McBSP
|
|
JTAG
|
McBSP
|
|
|
|
|
|
|
|
|
ISA
Expansion Bus
|
|
|
|
SPM176430ER1000-256 dspModule™ |
|
|
|
 |
|
|
|
with standard Heatsink installed |
|
|
|
 |
|
|
|
Rugged IDAN® Configuration |
|
Features:
- 3.3V and 5V PCI signaling compatible
- 1 GHz TMS320C6416T DSP
- 8000 MIPS operation
- Linearly Addressable PCI Interface
- Eight 32-Bit Instructions/Cycle
- 1.0ns cycle time
-
32,
128 & 256 MB SDRAM
-
800 MB/s memory transfer rate
- 2 Mbytes FLASH
- All DSP resources accessible
from the PCI bus
- VLIW instruction device
- Watch-Dog Timer
- Bus master or target only (Switch Enabled)
-
Complete High performance DSP Co-processor module
-
Stackable 104-pin AT expansion bus
-
Stackable 120-pin PCI expansion bus for use with PC/104-Plus and
PCI-104 modules
-
3 Multi channel Buffered Serial Port (McBSP) (max. 75Mbit/s )
-
Boot Mode: PCI, or Flash Boot Mode (switch Enabled ROM Boot Mode
(Switch Enable)
-
All resources of the DSP can be accessed from the PCI bus
-
TMS320™ DSP ALGORITHM STANDARD
- Mating Connectors
- Standard 14-pin 0.1" DIL header (JTAG)
- Standard 12-pin 0.1" DIL header (Power)
- Standard 10-pin 0.1" DIL header (SyncBus)
- 3 Standard 10-pin 0.1" DIL headers (McBSP)
I/O:
- Processor
- Three Multi channel Buffered Serial Ports (McBSP):
- Buffered ASynchronous Memory Interface of the DSP
- High speed data transfer device between the DSP and the analog
interface
- TI/EI, MVIP, SCSA, ST bus, AC97 SPI Compatible
- JTAG emulator connector
- SyncBus for Synchronous operation with RTD's high performance:
Software:
- Supported under the following operating systems:
- DOS (DPMI32)
- Windows 98/NT4/2000/XP
- Linux (2.4 and 2.6 kernels)
- Includes the RTD dspFramework, a suite of libraries and
example programs to simplify application development. Key features of the RTD
dspFramework include:
- Matching host-side and DSP-side libraries.
- Standard interfaces for passing messages between the
DSP and the host system.
- Ability for the host to call DSP functions.
- Support for single and multi-threaded applications (DSP/BIOS).
- Support for on-board hardware (McBSP, SyncBus, Flash,
etc).
- DSP applications can be downloaded through the PCI
bus, or programmed into the on-board flash.
- Modular design and full source code makes it possible
to modify and extend the framework.
- Source code, example programs, and API documentation are
included for all supported platforms.
- TI Code Composer Studio required to develop and compile
DSP applications.
Physical
Attributes:
-
Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
-
Weight: Approximately 0.10 Kg (0.22 lbs.)
-
Operating Temperature: -20° to +70°C: 90% humidity non-condensing
-
Storage Temperature: -55° to +125°C
-
Power requirements 1 GHz: 5.4 W @ 5 VDC typical
Documentation and Software Downloads:
Ordering Information
| Part Number
| Description
| OEM Price
|
| SPM176430ER1000-32 |
DSP Module - 32 MB SDRAM dspModule™
|
$ 1195 |
| SPM176430ER1000-128 |
DSP Module - 128 MB SDRAM dspModule™
|
$ 1295 |
| SPM176430ER1000-256 |
DSP Module - 256 MB SDRAM dspModule™
|
$ 1495 |
Copyright © 1998-2012 RTD Embedded Technologies, Inc. All rights reserved.