BRG17088HR-M PCI to ISA Adapter Module
PCI stack-through		ISA stack-down

Features:

• PCI to ISA Bridge
  • Companion for RTD's PCI/104-Express CMA22 Series
    Intel Core 2 Duo and Core 2 Celeron Single Board Computers
  • Provides support for most ISA add-in cards (view list)
  • Fully compatible with 8-bit and 16-bit memory and I/O mapped cards
  • Full Subtractive Decode of PCI cycles – no setup required.
  • No DMA support
  • 15 ISA Interrupts and IOCHCK#

• Advanced Digital I/O (aDIO^™)
  • One 8-bit port programmable as input or output
  • Eight bit-programmable I/O with Advanced Digital Interrupt Modes
    • Event Mode Interrupt generates an interrupt when any input bit changes
    • Match Mode Interrupt generates an interrupt when input bits match a preset value
    • External Strobe Mode latches 8 data inputs and generates and interrupt
  • Two Strobes can be configured as readable inputs.

I/O:

• 40-pin 0.100" DIL Advanced Digital I/O
• PC/104: 16-bit stack down ISA bus
• PC/104-Plus: 32-bit stack through PCI bus

Software:

• Advanced Digital I/O Interface (aDIO^™)  
  • DOS  examples with source code.
  • Windows drivers with Visual C++ examples, source code, and API documentation.
  • Linux driver and examples with full source code and API documentation

Physical Attributes:

• Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
• Weight: Approximately 0.06 Kg (0.14 lbs.).
• Operating Temperature -20°C to +70°C: 90% humidity non-condensing
• Storage Temperature -40°C to +85°C
• MTBF: 2,404,952 hours
• Power Requirements: 1.0W @ +5 VDC typical (Board Only)