CM17208HR and CM18208HR
PC/104-Plus and PCI-104 FireWire™ Module

Operating Temperature -40° to +85°C

PC/104-Plus CM17208HR FireWire™ Peripheral Module

PCI-104 CM18208HR FireWire™ Peripheral Module

Rugged IDAN® Configuration

• 3 independent channels
• 3 universal 1394b bilingual connectors support connections to 1394a and 1394b devices
• Support for 100/200/400/800 Mb/s on each channel
• Re-settable 1A fuse on each channel.
  • +12V @ 2 Amps max. onboard supply.
  • External +12V power input connector available.
• FireWire™, iLINK™, and SB1394™ implementation of IEEE STD-1394b

Description:

This module provides high performance serial bus communication complete with FireWire, iLINK, and SB1394 implementation of IEEE STD-1394b.  Three independent channels are capable of supporting 100/200/400/800 Mb/s on each channel.  The CM17208HR is equipped with a 1394b bilingual connector for universal integration with both 1394a and 1394b devices.  Each input is protected with a 1A re-settable fuse.

Software:

• Uses standard OHCI FireWire drivers built into modern operating systems
• FireWire interfaces natively supported under:
  • Windows 98 and 2000 (1394a transfer rates only)
  • Windows XP and 2003
  • Linux 2.4 and 2.6 kernels via open source driver
  • Windows CE 5.0 (1394a transfer rates only)

Physical Attributes:

• Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
• Weight: Approximately 0.07 Kg (0.16 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125 °C
• Power requirements   0.5 W @ 5 VDC typical (Board Only)
  • Power consumption can increase depending on the type and number of FireWire devices attached.