DPM104HR
PC/104 Dual Port Memory Board
with two 16 bit PC/104 Busses

-40° to +85°C Operation

	ISA (PC/104)
address &IRQ Jumpers
		ISA (PC/104)
	DPM104HR Dual Port Memory Module
	Rugged IDAN® Configuration

Features:

The DPM104HR board is ideal in fault tolerant redundant systems or in PC/104 based control systems requiring multiprocessing capabilities over the PC/AT bus. RTD provides example programs and drivers for Windows and Linux including source code. These drivers and programs let you set up communication between the two sides of the shared memory with maximum flexibility. You may choose to run different operating system on different sides of the shared memory; for example you can use WIN NT 4.0 on one side of the DPM104HR for user interface services, while on the other side of the DPM104HR a control algorithm can be executed under Linux. Both processes can then work independently of each other.

This PC/104 compliant dual port SRAM board features two 16-bit PC/104 bus interfaces, with 16KB of static RAM. Flexible software control can be achieved by using semaphores and interrupts for signaling between the two sides of the shared memory. The DPM104HR is mapped in to the low (first MByte) of host PC memory. The 32KB jumper selectable address window may reside in any part of this memory space. Interrupts are jumper selectable in the range from IRQ5 to IRQ15. Both sides of the shared dual port SRAM may be configured independently from each other.

• Drivers and Example Programs
• Software Manual(s)
• Application Notes