PCIe/104 Intel Xeon SBC Enclosure

IDAN-CMA34KB
Stackable Packaging System for CMA34KB PCIe/104 Single Board Computers & Controllers
Includes SATA34106HR 2.5" Hard Drive Carrier

(Front)

(Back)

Key Features

PCIe/104 stackable bus structure
- PCIe Type 2 expansion buses
Complete PC-compatible Single Board Computer (SBC)
Intel Processor Options
- Core i3-7102E
  - 2 Cores, 4 Threads
  - 2.1 GHz Clock Speed
  - 100°C Max. Core Temperature
- Xeon E3-1505L V6
  - 4 Cores, 8 Threads
  - 2.2 GHz Clock Speed
  - 3.0 GHz Max Turbo Frequency
  - 100°C Max. Core Temperature
- Xeon E3-1505M V6
  - 4 Cores, 8 Threads
  - 3.0 GHz Clock Speed
  - 4.0 GHz Max Turbo Frequency
  - 100°C Max. Core Temperature
16GB Dual-Channel DDR4 SDRAM (Surface-Mounted)
- Robust Error Code Correction (ECC)
Up to 60GB standard surface-mounted industrial-grade SATA flash drive available
Five added SATA Ports
Four x4 PCIe Links
Eight x1 PCIe Links
Dual Gigabit Ethernet
Four Serial Ports (RS-232/422/485)
Five USB 2.0 Ports
DisplayPort 1.2
- Supports 4K resolution
- Includes Audio
14 Advanced Digital I/O (aDIO)
Trusted Platform Module (TPM)
- Fully compliant to the Trusted Computing Group (TCG) Trusted Platform Module (TPM) version 2.0 specification, Level 00, Revision 1.38
- Provides for secure storage of cryptographic keys
Modular rugged milled aluminum frames
Integral Structural Heatsink with Embedded Heatpipes & External Fins for superior heat dissipation
Maintains the PC/104 self-stacking bus concept
Allows quick interchangeability of modules
Each frame includes wiring, connectors, CMA34KB cpuModule and SATA34106HR
2.5" Hard Drive Carrier Module (Installation of Flash Drive available. May affect standard operating temperature.)
Aluminum Alloy - 6061, Temper-T6
Finish - MIL-PRF-85285 polyurethane topcoat, per FED-STD-595, color 36495 (light gray). Panel engravings per FED-STD-595, color 37038 (black).
- Additional paint options available upon request

External I/O Ports

Two 9-pin D-sub receptacles (male pins) with RJ-45 Adapters
- 1000/100/10 BASE-T Ethernet
- Gigabit Ethernet
  - Intel I210-IT PCIe v2.1 Controller
  - 1Gb/s speed with auto-negotiation
  - Jumbo Frame Support
  - PXE Network Boot
Two 9-pin D-sub receptacles (male pins)
- Four RS-232/422/485 serial ports on two connectors, each connect configurable as:
  - One full RS-232 port with TxD, RxD, CTS, RTS, DSR, DTR, RI, and DCD
  - One RS-422/485 port with TxD+, TxD-, RxD+, RxD-
  - Two RS-232 ports:
    - One with TxD, RxD, RI, DCD, DSR, and DTR
    - One with TxD and RxD
  - Two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-
- 120 ohm termination for RS-422/485 Mode
- Serial Ports Modes are BIOS-configured, no jumper settings required
- Standard PC 16550/16750 UART Interface
- Baud rate multiplier allows rates up to 1 Mbps with standard drivers
- Increased FIFO size of 512 bytes improves reliability at higher rates
- Echo cancellation, Auto-RTS, and Auto-CTS allow for greater efficiency
Two 9-pin D-sub receptacles (male pins) with USB Type A female adapters
- Four USB 2.0 Ports
DisplayPort connector
- DisplayPort, DVI, and HDMI (supports 4K resolution)
- Audio
25-pin female D-sub receptacle (female sockets)
- Advanced Digital I/O
  - One 8-bit-programmable I/O with Advanced Digital Interrupt Modes
    - Event Mode Interrupt generates an interrupt when any input bit changes
    - Match Mode Interrupt generates an interrupt when input bits match a preset value
    - External Strobe Mode latches 8 data inputs and generates and interrupt
  - One 4-bit port programmable as input or output
  - Two Strobes can be configured as readable inputs
- Additional Hardware Features
  - ATX power button input
  - Reset power button input
  - RTC battery input
Utility USB
- High retention Type A connector
- Complies with Class 1 Div II minimum withdrawal force of 15 N
- Connection for standard USB devices such as:
  - Keyboard/mouse
  - Flash drives
  - Cameras
BIOS configurable button
- Can be configured for ATX power, or hardware reset
- Button can be disabled

Internal I/O Ports

SATA Controller
Optional Surface-Mount Flash:
- Up to 60GB Onboard Industrial SATA Flash Drive
- Built in Wear Leveling, Error Correction, and Bad Block Management
- SMART supported (Self-Monitoring, Analysis and Reporting Technology)
- Write protection may be enabled/disabled through the BIOS
- Note: Flash drives are not inlcuded in RTD's standard CPU configurations. If you require soldered flash memory, please contact RTD Sales for pricing and availability.

Recommended Accessories

XK-CM117 Cable Kit
- Breaks a 9-pin dual RS-232 D-sub into two 9-pin D-subs
XK-CM118 Cable Kit
- Breaks a 9-pin dual RS422/485 D-sub into two 9-pin D-subs

Physical Attributes

Dimensions
- Length: 5.98 inches (151.9 mm)
- Width: 6.62 inches (168.1 mm)
- Height: 1.62 inches (41.1 mm)
Weight: Approximately 1.96 lbs. (0.89 Kg)
MTBF: TBD
Power Consumption
- CPU power consumption is heavily influenced by the running software and system activity.
- IDAN-CMA34KBD210016384HR-S0GX: TBD
- IDAN-CMA34KBQ220016384HR-S0GX: TBD
- IDAN-CMA34KBQ330016384HR-S0GX: TBD

Board-Level Specifications

Documentation and Downloads

Ordering Information

RTD Ordering Part Number	Processor Brand Name	Cores/ Threads	Clock Speed (GHz)	DDR4 SDRAM	SSD	Value OEM*
IDAN‑CMA34KBD2100HR‑16384/S0GX	Intel Core i3-7102E	2C/4T	2.1	16GB	0GB	$5595
IDAN‑CMA34KBQ2200HR‑16384/S0GX	Intel Xeon E3‑1505L v6	4C/8T	2.2			$5895
IDAN‑CMA34KBQ3000HR‑16384/S0GX	Intel Xeon E3‑1505M v6	4C/8T	3.0			$5995

— Sequentially laminated PCB fabricated in accordance with IPC-6012 Class 3 Standards —
*OEM price includes soldered SDRAM. Surface-mount flash drive available (call for pricing).

RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087