PCI/104-Express Intel Atom E3800 SBC Enclosure

IDAN-CMX34BT
Stackable Packaging System for CMX34BT PCIe/104 Single Board Computers & Controllers
Intel Atom E3800: 1.33 GHz - 1.91 GHz Single-Core and Multi-Core Processors
Includes SATA34106HR 2.5" Hard Drive Carrier

(Front)

(Back)

Key Features

Complete PC-compatible Single Board Computer
PCI/104-Express stackable bus structure
- PCIe Type 2 expansion bus
Intel Atom E3800-series 1.33 GHz – 1.91 GHz Processors
- Max. Core Temperature: 110°C
- E3815 Single-Core, 1.46 GHz
- E3825 Dual-Core, 1.33 GHz
- E3845 Quad-Core, 1.91 GHz
4GB DDR3 Surface-Mounted SDRAM
Up to 60GB standard surface-mounted industrial-grade SATA flash drive available
Four x1 PCIe Links
One SATA Port (connected to an integrated SATA carrier)
Four Serial Ports (RS-232/422/485)
Five USB 2.0 Ports
Dual Gigabit Ethernet
Analog VGA
Embedded DisplayPort (eDP) 1.3
- DisplayPort, DVI, and HDMI
- Supports 4K resolution
- Includes Audio
Advanced Digital I/O (aDIO)
Trusted Platform Module (TPM)
- Fully compliant to the Trusted Computing Group (TCG) Trusted Platform Module (TPM) version 1.2 specification
- Provides for secure storage of cryptographic keys
Modular rugged milled aluminum frames
Integral Structural Heatsink with Embedded Heatpipes for superior heat dissipation
Maintains the PC/104 self-stacking bus concept
Allows quick interchangeability of modules
Each frame includes wiring, connectors, CMX34BT cpuModule and SATA34106HR
2.5" Hard Drive Carrier Module (Installation of Flash Drive available. May affect standard operating temperature.)
Aluminum Alloy - 6061, Temper-T6
Finish - MIL-PRF-85285 polyurethane topcoat, per FED-STD-595, color 36495 (light gray). Panel engravings per FED-STD-595, color 37038 (black).
- Additional paint options available upon request

External I/O Ports

Two 9-pin D-sub receptacles (male pins) with RJ-45 adapters
- 1000/100/10 BASE-T Ethernet
- Gigabit Ethernet
  - Intel WG82574IT PCI Express x1 Controller
  - 10/100/1000 Auto-negotiation
  - Jumbo Frame Support
  - PXE Network Boot
Two 9-pin D-sub receptacles (male pins)
- Four RS-232/422/485 serial ports on two connectors, each connect configurable as:
  - One full RS-232 port with TxD, RxD, CTS, RTS, DSR, DTR, RI, and CD
  - One RS-422/485 port with TxD+, TxD-, RxD+, RxD-
  - Two RS-232 ports:
    - One with TxD, RxD, CTS, and RTS
    - One with TxD and RxD
  - One RS-232 port with TxD and RxD, and one RS-422/485 port with TxD+, TxD-, RxD+, RxD-
  - Two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-
- 120 ohm termination for RS-422/485 Mode
- Serial Ports Modes are BIOS-configured, no jumper settings required.
- Standard PC 16C550 UART Interface
Two 9-pin D-sub receptacles (male pins) with USB Type A female adapters
- Two USB 2.0 ports per connector
- Automatically resettable over-current protection (500 mA @ 5Vdc)
- USB Boot capability
15-pin female high density D-sub receptacle (female sockets)
- Analog VGA Interface
DisplayPort connector
- DisplayPort, DVI, and HDMI (supports 4K resolution)
- HD Audio
25-pin female D-sub receptacle (female sockets)
- Advanced Digital I/O
  - One 8-bit-programmable I/O with Advanced Digital Interrupt Modes
    - Event Mode Interrupt generates an interrupt when any input bit changes
    - Match Mode Interrupt generates an interrupt when input bits match a preset value
    - External Strobe Mode latches 8 data inputs and generates and interrupt
  - One 4-bit port programmable as input or output
  - Two Strobes can be configured as readable inputs
- Additional Hardware Features
  - ATX power button input
  - Reset power button input
  - RTC battery input
Utility USB
- High retention Type A connector
- Complies with Class 1 Div II minimum withdrawal force of 15 N
- Connection for standard USB devices such as:
  - Keyboard/mouse
  - Flash drives
  - Cameras
BIOS configurable button
- Can be configured for ATX power, or hardware reset
- Button can be disabled

Internal I/O Ports

SATA Controller
Optional Surface-Mount Flash:
- Up to 60GB Onboard Industrial SATA Flash
- Built in Wear Leveling, Error Correction, and Bad Block Management
- SMART supported (Self-Monitoring, Analysis and Reporting Technology)
- Write protection may be enabled/disabled through the BIOS
- Note: Flash drives are not inlcuded in RTD's standard CPU configurations. If you require soldered flash memory, please contact RTD Sales for pricing and availability.

Physical Attributes

Dimensions
- Length: 5.98 inches (151.9 mm)
- Width: 5.12 inches (130.0 mm)
- Height: 1.36 inches (34.5 mm)
Weight: Approximately 0.64 kg (1.40 lbs.)
Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
Storage Temperature: -40 to +70°C
MTBF: TBD
Power requirements:
- CPU power consumption is heavily influenced by the running software and system activity.
- Typical power consumption:
  - IDAN-CMX34BTS1460HR: 7.1 W
  - IDAN-CMX34BTD1330HR: 7.6 W
  - IDAN-CMX34BTQ1910HR: 9.5 W
- Please refer to the hardware manual for detailed consumption scenarios.

cpuModule & Hard Drive Carrier Specifications

Documentation and Downloads

Ordering Information

RTD Part Number	Processor Brand Name	Cores	Clock Speed (GHz)	DDR3 SDRAM	SSD	Value OEM*
IDAN-CMX34BTS1460HR‑4096/S0GX	Intel E3815	1	1.46	4GB	0GB	$3395
IDAN-CMX34BTD1330HR‑4096/S0GX	Intel E3825	2	1.33			$3445
IDAN-CMX34BTQ1910HR‑4096/S0GX	Intel E3845	4	1.91			$3495

— Sequentially laminated PCB fabricated in accordance with IPC-6012 Class 3 Standards —
*OEM price includes soldered SDRAM. Surface-mount flash drive available (call for pricing).

RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087