RTD logo RTD Embedded Technologies, Inc.
An AS9100 and ISO 9001 Certified Company
applications


Intel ® Core™ i7 Single Board Computers
PCIe/104 Rugged SBCs & Controllers

 
 

 

Description

The CMA34CR-series CPUs are low-power dual-core PC/104 single board computers with a PCIe/104 stackable bus structure. As a part of RTD's advanced PCI Express offering, these Intel-based CPUs are exceptionally suited for applications requiring performance-rich technologies. TPM (Trusted Platform Module) included for hardware-based cryptography. The surface-mount Type 2 PCI Express connectors enable users to stack multiple peripheral modules above and below the CPU. A 60GB onboard flash drive is standard.


Processor
Brand Name
Cores Clock
Speed
(GHz)
Max
Turbo
(GHz)
DDR3
SDRAM
SSD SATA
Ports
PCIe
x1
PCIe
x4
GigE
USB
3.0
USB
2.0
Serial aDIO Display
Port w/
Audio
SVGA
Intel 3517UE 2 1.7 2.8

up to
8GB

60GB 5 8 3 2 4 3 4 14 1 1

 

Mouseover thumbnails above to view larger images.
Rugged IDAN system configurations available.

Key Features



Technical Details
  • Stackable Expansion Buses
    • Type 2 PCIe Stacking Up (separate from down-stacking bus)
      • Four PCI Express x1 Links (Gen 2, 5GT/s)
      • One PCI Express x4 Link (Gen 3, 8GT/s)
      • Two SATA Ports (Revision 3.0, 6Gb/s)
      • Two USB 3.0 Ports (compatible with USB 2.0)
      • SMBus
      • ATX Power Supply Signaling
      • RTC Battery
    • Type 2 PCIe Stacking Down (separate from up-stacking bus)
      • Four PCI Express x1 Links (Gen 2, 5GT/s)
      • Two PCI Express x4 Links (Gen 3, 8GT/s)
      • Two SATA Ports (Revision 2.0, 3Gb/s)
      • Two USB 3.0 Ports (compatible with USB 2.0)
      • SMBus
      • ATX Power Supply Signaling
      • RTC Battery
  • Processor and Chipset
    • Intel Core i7 Family: 3517UE (Dual-Core)
    • Processor Options Include:
      • Execute Disable (XD/NX) Security
      • 22nm Lithography
    • Intel Virtualization Technology (VT-x)
    • Intel QM77 Chipset
  • Memory
    • 4GB or 8GB Dual-Channel DDR3 SDRAM
    • Surface mounted for maximum reliability
    • Features robust Error Code Correction (ECC)
    • Transfer rate of 1600 MT/s (PC3-12800) for maximum performance
  • Serial ATA (SATA)
    • 60GB Surface-Mounted SATA Flash Drive
      • Built in Wear Leveling, Error Correction, and Bad Block Management
      • SMART supported (Self-Monitoring, Analysis and Reporting Technology)
      • Write protection may be enabled/disabled through the BIOS
    • One onboard SATA data connector (Revision 2.0, up to 3.0 Gbit/sec interface speed)
    • Four additional SATA ports (two on the top bus connector, and two on the bottom)
      • Use with drive carriers or cable kit
      • (Top bus connector) 2 SATA ports at Revision 3.0, up to 6.0 Gbit/sec interface speed
      • (Bottom bus connector) 2 SATA ports at Revision 2.0, up to 3.0 Gbit/sec interface speed
    • Supports IDE mode for legacy compatibility
  • Video
    • Intel HD Graphics 4000
    • Analog VGA and Embedded DisplayPort (eDP) outputs
    • Dual simultaneous output supported
    • DisplayPort output may be adapted to Analog VGA, DVI, or HDMI
    • Supports 4K resolution
  • Dual Gigabit Ethernet
    • Intel WG82574IT PCI Express x1 Controller
    • 10/100/1000 Auto-negotiation
    • Jumbo Frame Support
    • PXE Network Boot
  • USB 3.0
    • SuperSpeed, HighSpeed, LowSpeed, or FullSpeed
    • Four Ports available via PCIe/104 (USB 3.0 breakout board available)
  • USB 2.0
    • HighSpeed, FullSpeed, or LowSpeed
    • 3 Ports
    • Automatically resettable over-current protection (700 mA @ 5Vdc) for onboard ports
    • USB Boot capability
  • Serial Ports
    • Four RS-232/422/485 serial ports on two connectors, each connector configurable as:
      • One full RS-232 port with TxD, RxD, CTS, RTS, DSR, DTR, RI, and CD
      • One RS-422/485 port with TxD+, TxD-, RxD+, RxD-
      • Two RS-232 ports:
        • One with TxD, RxD, CTS, and RTS
        • One with TxD and RxD
      • Two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-
    • 120 ohm termination for RS-422/485 Mode
    • Serial Ports Modes are BIOS-configured, no jumper settings required
    • Standard PC 16550/16750 UART Interface
    • Baud rate multiplier allows rates up to 1 Mbps with standard drivers
    • Increased FIFO size of 512 bytes improves reliability at higher rates
    • Echo cancellation, Auto-RTS, and Auto-CTS allow for greater efficiency
  • Advanced Digital I/O (aDIO)
    • One 8-bit-programmable I/O with Advanced Digital Interrupt Modes
      • Event Mode Interrupt generates an interrupt when any input bit changes
      • Match Mode Interrupt generates an interrupt when input bits match a preset value
      • External Strobe Mode latches 8 data inputs and generates and interrupt
    • One 4-bit port programmable as input or output
    • Two Strobes can be configured as readable inputs
  • Thermal Management
    • Thermal Throttling reduces clock speed to prevent thermal runaway
    • Auto Fan Control only runs fan when needed
    • Hardware monitor for temperature
    • Mini Fan Heatsink with Auto Fan control
    • Passive Structural Heatsink & Heatpipes in IDAN and HiDAN System Configurations
  • Power Management
    • ACPI 4.0a Support – Advanced Configuration and Power Interface
    • ATX Support for “Soft Off”
  • Additional Hardware Features
    • Watchdog Timer
    • Utility Port 2.0
      • 1x USB 2.0 Port with over-current protection (700 mA @ 5Vdc)
      • Real Time Clock (external battery to maintain time only)
      • PC Speaker
      • ATX Power Button Input
      • Reset Button Input


Software
  • RTD Enhanced BIOS
    • Supports boot from SATA, USB, or Ethernet (PXE)
    • Flash-based CMOS Setup – No battery required to store settings
    • UEFI Shell – Access a command prompt
    • Special RTD Reliability Enhancements
  • Compatible with all x86 PC operating systems:
    • DOS (MS-DOS, ROM-DOS, PC-DOS)
    • Windows (7, 8.1, Embedded Standard), both 32 and 64-bit editions
    • Linux (desktop and real-time versions)
    • RTOSes such as QNX, VxWorks, Windows CE, and xPC Target
    • Note: Some hardware interfaces may require special drivers
  • Includes pre-installed Datalight ROM-DOS
  • Drivers and support provided for DOS, Windows, and Linux


Recommended Accessories

Physical Attributes
  • Dimensions PCIe/104
    • Board Size
      • Length (L): 3.775 inches (95.89 mm)
      • Width (W): 3.550 inches (90.17 mm)
      • Thickness: 0.093 inches (2.36 mm)
    • I/O Extension
      • Length (EL): 3.125 inches (79.380 mm)
      • Width (EW): 0.500 inches (12.700 mm)
    • Stand-off Height
      • Above the CPU: 0.866 inches (22.00 mm)
      • Below the CPU: 0.600 inches (15.24 mm)
  • Weight: Approximately 0.52 lbs. (0.24 Kg) with heatsink
  • Standard Operating Temperature, 90% humidity non-condensing:
    • Dual-core (CMA34CRD): -40 to +85°C
  • Storage Temperature: -40 to +85°C
  • MTBF
    • Dual-core configurations with 8GB DDR3 SDRAM: 434,368 hours
  • Input Power Requirements: +5 VDC and +12 VDC
  • Power Consumption
    • CPU power consumption is heavily influenced by the running software and system activity.
    • Please refer to the hardware manual for detailed consumption scenarios.


Documentation and Downloads

Interactive model to illustrate feature and connector placement. Final hardware configuration may include component variations.

 

 

Ordering Information

Part Number Processor
Brand Name
Cores Clock
Speed
(GHz)
SSD DDR3
SDRAM
Value
OEM*
CMA34CRD1700HR‑4096/S60GX Intel 3517UE 2 1.7 60GB 4GB $4895
CMA34CRD1700HR‑8192/S60GX 8GB $4895


— Sequentially laminated PCB fabricated in accordance with IPC-6012 Class 3 Standards —
*OEM price includes an onboard flash drive and soldered SDRAM (Other flash and SDRAM sizes available. Call for pricing.)

 

 

 

RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com  |  +1-814-234-8087