AIM6020HR
Industrial Analog Interface Module with DSP PlatformBus
Operating Temperature -40° to +85°C
![]() |
AIM6020 Analog Interface Module |
![]() |
Rugged IDAN configurations available |
Key Features
- PC/104 compliant size
- Two Independent 1.25 MHz 12 bit A/D converters
- Two Independent 200 kHz 12 bit D/A converters
- Non-volatile digital pot-controlled Amplifier
- Programmable Switched Capacitor anti-aliasing Filter
- Non-volatile digitally controlled offset
- Up to four devices on PlatformBus
- 5 Vdc Supplied through the PlatformBus
- Stackable 80-pin PlatformBus (Buffered Asynchronous Memory Interface of the DSP)
- Multi-channel Buffered Serial Port (McBSP) (max. 100Mbit/s )
- SyncBus - Synchronous sampling or triggering with the dspModule™
- Gain Settings by Non-volatile dig pot from -6 dB to +6 dB
- Offsets by dig pot
- Mating Connectors
- Standard 16-pin 0.1" DIL header (Analog)
- Standard 10-pin 0.1" DIL header (SyncBus)
- Standard 10-pin 0.1" DIL header (McBSP)
I/O
- Two Independent 1.25 MHz 12 bit A/D converters
- Full scale input range = +/- 2.5 V
- Two Independent 200 kHz 12 bit D/A converters
- Buffered outputs: +/- 5V full scale range
- Filtered outputs: +/- 2.5V full scale range
- PlatformBus (3.3V)
- 32-bit data
- 16-bit address
- Buffered Asynchronous Memory Interface of the DSP
- High speed data transfer device between the DSP and the analog interface
- Multi-channel Buffered Serial Port (McBSP):
- Buffered Asynchronous Memory Interface of the DSP
- High speed data transfer device between the DSP and the analog interface
- TI/EI, MVIP, SCSA, ST bus, AC97 SPI Compatible
- SyncBus for Synchronous operation with DSP
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight: Approximately 0.22 lbs. (0.10 Kg)
- Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
- Storage Temperature: -55 to +125°C
- Power Consumption 2.8 W @ 5 VDC typical
Documentation and Downloads
- Contact RTD for additional documentation and software.
Ordering Information
Part Number | Description | Value OEM |
---|---|---|
AIM6020HR | High-Reliability Analog Interface Module for DSP dataModules | $1145 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
[email protected] | +1-814-234-8087