DM35419HR & DM35219HR
PCIe/104 18-Bit Analog-to-Digital dataModules
Mouseover thumbnails below to view larger images. |
![]() |
Available in stackable, rugged enclosures |
Description
The DM35x19 dataModules are high speed 18-bit data acquisition modules in a PCIe/104
format. The DM35219 provides 4 differential or single-ended analog input channels
with programmable gain and input ranges; the DM35419 provides 8 channels.
Each module has simultaneous or independent
sampling rates up to 1.5 MHz. The DM35419 and DM35219 also provide 8 or 4 individually
controlled analog outputs, and multiple board synchronization with the SyncBus.
The DM35219HR-F750 features a 7-pole elliptic low pass anti-aliasing filter on both the input channels (-3dB @ 750 kHz) and output channels (-3dB @ 400 kHz). The low pass filters provide excellent noise attenuation to frequencies above 750 KHz for the input channels and 400 KHz for the output channels.
Key Features
- PC/104 form factor
- PCIe/104 stackable bus structure
- PCIe universal expansion bus (Type 1 or Type 2)
- PCIe x1 interface (Gen 2, 5 GT/s)
- PCIe link repopulation allowing increased PCI Express stack capacity
- Digital I/O
- 32-bit port of digital I/O
- Bit programmable direction
- 5V tolerant TTL signaling level
- Differential synchronous SyncBus
- Allows simultaneous sampling between multiple boards
- Allows multiple boards to share a common clock
- Can be cabled or stacked
- DM35419HR Specific Features:
- 8-channel, differential or single-ended input 18-bit analog-to-digital converter at 1.5 MHz per channel
- 8-channel, single-ended, 16-bit digital-to-analog output at 1.0MHz per channel
- Programmable ranges and gains
- DM35219HR Specific Features:
- 4-channel, differential or single-ended input 18-bit analog-to-digital converter at 1.5 MHz per channel
- 4-channel, single-ended, 16-bit digital-to-analog output at 1.0 MHz per channel
- Programmable ranges and gains
- DM35219HR-F750 Specific Features:
- 4-channel, differential or single-ended input 18-bit analog-to-digital converter at 1.5 MHz with anti-aliasing filter at 750 kHz per channel
- 4-channel, single-ended, 16-bit digital-to-analog output at 1.0MHz with anti-aliasing filter at 400 kHz per channel
- Programmable ranges and gains
- Available in stackable, rugged enclosures
- Requires only +5 VDC for operation
Connector Interface
- Stackable Buses
- PCIe universal expansion bus (Type 1 or Type 2)
- External I/O Connectors
- 40-pin right-angle header
- Digital I/O
- 32-bit port of digital I/O
- Bit programmable direction
- 5V tolerant TTL signaling level
- Digital I/O
- 50-pin right-angle header
- 8 or 4 Analog Inputs
- 18-bit differential or single-ended
- 1.5 MHz throughput
- Gains 1, 2, 4, and 8
- Bipolar ranges ±10, ±5, ±2.5, ±1.25, and ±0.625 volts
- Unipolar ranges 0 – 10, 0 – 5, 0 – 2.5, and 0 -1.25 volts
- ±28 volt input protection
- Independent or simultaneous sampling
- 8 or 4 Analog Outputs
- 16-bit single-ended
- 1 microsecond settling time
- Bipolar ranges ±10, ±5, and ±2.5 volts
- Unipolar ranges 0 – 10, 0 – 5, and 0 – 2.5 volts
- 8 or 4 Analog Inputs
- 16-pin header (right-angle and stack-through options)
- SyncBus
- Three single-end or differential signals that can be user programmed as inputs or outputs (LVDS)
- One master clock signal that can be user programmed as an input or output (LVDS)
- SyncBus
- 40-pin right-angle header
Software
- Includes software packages for the following Operating Systems:
- Linux 2.6 and 3.x Kernels
- Windows 7 (32-bit and 64-bit)
- Source code provided for easy porting to other platforms, including RTOSes.
- Example programs with source code provide a starting point for developing custom applications.
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight: Approximately 0.18 lbs. (0.08 Kg)
- Standard Operating Temperature, 90% humidity non-condensing
- DM35419HR: -40 to +85°C
- DM35219HR-F750: -40 to +70°C
- DM35219HR: -40 to +85°C
- Storage Temperature: -55 to +125°C
- MTBF
- DM35419HR: TBD
- DM35219HR: TBD
- DM35219HR-F750: TBD
- Input Power Requirements: +5 VDC
- Typical Power Consumption
- DM35419HR: TBD
- DM35219HR: TBD
- DM35219HR-F750: TBD
Documentation and Downloads
- Hardware Manual (DM35219HR and DM35419HR)
- Hardware Manual (DM35219HR-F750)
- Rugged Enclosure (IDAN) Datasheet
- Drivers and Example Programs
Ordering Information
Part Number | Description | Value OEM |
---|---|---|
DM35419HR | PCIe/104 18-bit A/D dataModule 8 analog I/O and right-angle SyncBus |
$3595 |
DM35419HR‑SS | PCIe/104 18-bit A/D dataModule 8 analog I/O and stackthrough SyncBus |
$3595 |
DM35419HR‑SNS | PCIe/104 18-bit A/D dataModule 8 analog I/O and non-stackthrough SyncBus |
$3595 |
DM35219HR | PCIe/104 18-bit A/D dataModule 4 analog I/O and right-angle SyncBus |
$2895 |
DM35219HR‑SS | PCIe/104 18-bit A/D dataModule 4 analog I/O and stackthrough SyncBus |
$2895 |
DM35219HR‑SNS | PCIe/104 18-bit A/D dataModule 4 analog I/O and non-stackthrough SyncBus |
$2895 |
DM35219HR‑F750 | PCIe/104 18-bit A/D dataModule with anti-aliasing filters 4 analog I/O and right-angle SyncBus |
$2995 |
DM35219HR‑F750‑SS | PCIe/104 18-bit A/D dataModule with anti-aliasing filters 4 analog I/O and stackthrough SyncBus |
$2995 |
DM35219HR‑F750‑SNS | PCIe/104 18-bit A/D dataModule with anti-aliasing filters 4 analog I/O and non-stackthrough SyncBus |
$2995 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087