Mini PCIe Card Carriers
Dual-Slot Mini PCIe Card Carrier Module
Operating Temperature -40° to +85°C
|
Key Features
- PC/104 form factor
- Bus Structure Options:
- PCIe/104 (IM35410HR)
- PCIe universal expansion bus
(Type 1 & Type 2 compatibility)
- PCIe universal expansion bus
- PCI/104-Express (IM25410HR)
- PCIe universal expansion bus
(Type 1 & Type 2 compatibility) - PCI pass-through expansion bus
- PCIe universal expansion bus
- PCIe/104 (IM35410HR)
- Available in stackable, rugged enclosures
- Requires one PCIe x1 link and/or one USB 2.0 link
- USB repopulation and PCIe link repopulation allowing increased PCI Express stack capacity
- Dual Mini PCI Express Card Sockets
- Each socket supports three modes of operation
- Single x1 PCIe link (Gen 2, 5 GT/s) and single USB 2.0 link
- Single x1 PCIe link (Gen 2, 5 GT/s)
- Single USB 2.0 link
- Mounting holes permit installation of Full-Mini and Half-Mini sized Mini PCI Express modules
- LED connector provide external access to the LED signals on both Mini PCI Express sockets
- Each socket supports three modes of operation
- Selected Mini PCIe cards may affect standard operating temperature
- Requires only +5 VDC for operation
Description
RTD’s IM35410 and IM25410 modules offer dual Mini PCI Express sockets, which permit integration of third-party Mini PCI Express modules (also known as PCIe Mini Cards, or PCI Express Mini Cards) into rugged PCIe/104 and PCI/104-Express systems and enclosures.
For devices installed in the dual Mini PCI Express sockets of these modules, a pair of 2mm 10-pin vertical headers are available per socket, permitting breakout of auxiliary I/O on third-party modules that do not use the socket interface (for example, CAN bus). Such connections may be easily wired to these 2mm headers, and accessed externally via a corresponding set of 0.1" 10-pin right-angle headers on the board edge.
Connector Interface
- Stackable Buses
- PCIe universal expansion bus (PCIe/104 Type 1 and Type 2 compatibility)
- PCI expansion bus (IM25410 only)
- External I/O Connectors
- Four 10-pin right-angle headers for external breakout of Mini PCIe auxiliary connectors
- One 16-pin right-angle header for Mini PCIe status LEDs and W_DISABLE# inputs
- Onboard Sockets
- 2 Dual-Use Mini-PCIe card sockets
- Standard configuration accepts full-size cards
- Standoffs can be relocated to accept half-size cards
- Two Molex PicoBlade™ 1x10 vertical shrouded receptacles for each socket
- 2 Dual-Use Mini-PCIe card sockets
Recommended Accessories
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight (does not include third-party Mini PCIe cards): Approximately 0.12 lbs. (0.10 Kg)
- Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
- Storage Temperature: -55 to +125°C
- Input Power Requirements: +5 VDC
- Typical Power Consumption: 2.45 W (does not include third-party Mini PCIe cards)
Documentation and Downloads
Ordering Information
| Part Number | Description | Value OEM |
|---|---|---|
| IM35410HR | PCIe/104 Dual-Slot Mini PCIe Carrier Module | $425 |
| IM25410HR | PCI/104-Express Dual-Slot Mini PCIe Carrier Module | $475 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
[email protected] | +1-814-234-8087