LAN35E08HR
PCIe/104 Eight-Port Stackable Gigabit Ethernet Switch Expansion
Operating Temperature -40° to +85°C
|
Key Features
- PC/104 form factor
- PCIe/104 stackable bus structure
- PCIe universal pass-through expansion bus (Type 1 or Type 2)
- Eight 1000/100/10 Mbps Ethernet ports
- Plus two additional switch expansion ports
- Onboard tri-color LED for each Ethernet Port
- Flashing for activity
- Green = 1 Gbps
- Blue = 100 Mbps
- Red = 10 Mbps
- Connectors for external LEDs
- Configuration Options
- RJ-45 jacks: LAN35E08HR-RJ
- 10-pin right-angle headers: LAN35E08HR-D
- BroadCom BCM53115 Unmanaged Gigabit Ethernet Switch
- Jumbo Frame Support (up to 9KB)
- Passive heat sinks included
- Stack multiple modules together for additional switch ports
- Use with LAN35H08 for CPU connection without cables
- Available in stackable, rugged enclosures
- Requires only +5 VDC for operation
Description
The LAN35E08 is an 8-port 10/100/1000 Ethernet switch designed as an expansion board for the LAN35H08 switch, which includes a Gigabit Ethernet Controller. This switch module has a total of 10 ports: eight ports are available on-board, and two additional ports are available for switch expansion.
These Gigabit Ethernet switches are available with 10-pin DIL connectors (LAN35E08HR-D) or with RJ-45 connectors (LAN35E08HR-RJ).
Connector Interface
- Stackable Buses
- PCIe universal expansion bus (Type 1 or Type 2)
- External I/O Connectors
- Two 10-pin vertical headers for external LEDs
- Eight 10-pin right-angle headers for Ethernet ports (Part Number: LAN35E08HR-D)
- Eight RJ-45 jacks with LEDs for Ethernet ports (Part Number: LAN35E08HR-RJ)
- 37-pin D-sub receptacle in enclosed IDAN configuration
- Onboard Sockets
- Stack-up and stack-down switch expansion ports
Software
- None required.
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight: Approximately 0.44 lbs. (0.20 Kg)
- Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
- Storage Temperature: -55 to +125°C
- MTBF: 649,041 hours
- Input Power Requirements: +5 VDC
- Consult the hardware manual for detailed power consumption information.
Documentation and Downloads
Ordering Information
| Part Number | Description | Value OEM |
|---|---|---|
| LAN35E08HR-D | PCIe/104 Eight-Port Ethernet Switch Expansion Module (10-pin right-angle headers) | $895 |
| LAN35E08HR-RJ | PCIe/104 Eight-Port Ethernet Switch Expansion Module (RJ-45 jacks) | $895 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087