LAN35H108HR
PCIe/104 Eight-Port Stackable Gigabit Ethernet Switch for Scalable Networks
Operating Temperature -40° to +85°C
Mouseover thumbnails below to view larger images. |
Key Features
- PC/104 form factor
- PCIe/104 stackable bus structure
- PCIe universal expansion bus (Type 1 or Type 2)
- PCIe x1 interface
- Eight 1000/100/10 Mbps Ethernet ports
- Plus one host port and one switch expansion port
- Onboard tri-color LED for each Ethernet Port
- Flashing for activity
- Green = 1 Gbps
- Blue = 100 Mbps
- Red = 10 Mbps
- Connectors for external LEDs
- Configuration Options
- RJ-45 jacks: LAN35H108HR-RJ
- 10-pin right-angle headers: LAN35H108HR-D
- BroadCom BCM53162 Unmanaged Gigabit Ethernet Switch
- Intel WGI210IS PCI Express Ethernet Controller
for interface to host cpuModule - Jumbo Frame Support (up to 9KB)
- Passive heat sinks included
- Stacks with one or more LAN35E08HR for additional switch ports
- Available in stackable, rugged enclosures
- Requires only +5 VDC for operation
Interactive model to illustrate feature and connector placement. Final hardware configuration may include component variations.
Description
The LAN35H108 is an 8-port 10/100/1000 Ethernet switch. This switch module has a total of 10 ports: eight ports are available on-board, one port is available to the host CPU through a x1 PCI Express GigE controller, and one port is used as a switch expansion port. This design allows the CPU to use the switch without the need for external cables. The LAN35H108 mates with RTD's expansion switches (LAN35E08) adding to the total number of Ethernet ports in the system/stack.
These Gigabit Ethernet switches are available with 10-pin DIL connectors (LAN35H108HR-D) or with RJ-45 connectors (LAN35H108HR-RJ).
Connector Interface
 |
| The LAN35H108 is available in a pre-configured HiDANplus system. |
- Stackable Buses
- PCIe universal expansion bus (Type 1 or Type 2)
- External I/O Connectors
- Two 10-pin vertical headers for external LEDs
- Eight 10-pin right-angle headers for Ethernet ports (Part Number: LAN35H108HR-D)
- Eight RJ-45 jacks with LEDs for Ethernet ports (Part Number: LAN35H108HR-RJ)
- 37-pin D-sub receptacle in enclosed IDAN configuration
- 12-pin right angle header for power (option for standalone use)
- Onboard Sockets
- Stack-up switch expansion port
Software
- Ethernet Controller Drivers
- Drivers for Windows XP & Windows 7 (included on companion CD)
- Open source Linux drivers included in the kernel
- Drivers included in most modern operating systems. Check with the OS manufacturer
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight
- LAN35H108HR‑D: Approximately 0.20 lbs. (0.09 Kg) with heat sink
- LAN35H108HR‑RJ: Approximately 0.24 lbs. (0.11 Kg) with heat sink
- Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
- Storage Temperature: -55 to +125°C
- MTBF: TBD
- Input Power Requirements: +5 VDC
- Consult the hardware manual for detailed power consumption information.
Recommended Accessories
- XK-CM115 (12-pin power connector for stand-alone applications)
Documentation and Downloads
Ordering Information
| Part Number | Description | GigE Ports |
Connector Type |
Value OEM |
|---|---|---|---|---|
| LAN35H108HR‑D | PCIe/104 Gigabit Ethernet Switch Module (Host module for connection to optional CPU) |
8 | 10‑pin DIL | $1145 |
| LAN35H108HR‑RJ | PCIe/104 Gigabit Ethernet Switch Module (Host module for connection to optional CPU) |
8 | RJ‑45 | $1145 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087