Dual 10 Gbit/s Twisted Pair Ethernet Controller
LAN24550HR and LAN34550HR
|
 |
| Available in stackable, rugged enclosures |
Description
The LAN24550 and LAN34550 are dual 10 Gbit/s Copper Ethernet Modules. They provide two independent IEEE 10GBASE-T Ethernet connections using a single Ethernet controller chip. This board runs completely off of the PCI-Express bus, utilizing Intel’s X550 10 Gigabit Ethernet controller.
The X550-AT2 Ethernet controller is a second-generation 10GBASE-T controller with integrated MAC and PHY. It provides backward compatibility with existing 1000BASE-T, simplifying the migration to 10 GbE, and provides iSCSI, FCoE, virtualization, and Flexible Port Partitioning (FPP).
Users will find this product useful for applications such as server virtualization and centralized environments requiring shared workflow such as large CAD and software projects.
10 Gigabit — using stacked switch configurations — can introduce an increased use of redundancy as Active-Active LACP (Link Aggregation Control Protocol) port teaming. Multiple ports grouped into one logical link improves speed and availability.
The LAN24550 is the PCI/104-Express version which includes a pass-through PCI connector.
Features
- PC/104 form factor
- PCIe x4 Gen3 Interface
- PCIe/104 stackable bus structure
- PCIe Type 2 expansion bus (can be used with a PCIe/104 Type 2 host)
- PCI pass-through expansion bus (LAN24550 only)
- Available in stackable, rugged enclosures
- Intel X550 10 Gigabit Ethernet Controller
- 2 Independent 10 Gb/s Twisted Pair Ethernet Connections with Integrated MAC and PHY
- Backward compatible with IEEE 100BASE-TX and 1000BASE-T Ethernet standards
- NBASE-T (10/5/2.5Gb/s link speed) is also supported (only in Linux)
- Auto MDI/MDX
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- IEEE 802.1q and 802.1ad VLAN support
- Storage technologies: iSCSI and FCoE over 10GBASE-T.
- Network virtualization technologies: VXLAN and NVGRE.
- Integrated IPsec security engines.
- Secure NVM update support.
- Jumbo frames of up to 15.5 KB.
- RJ45 connectors with integrated magnetics and Link/Activity indicator LEDs
- 10/1 GbE data rate per port: support for vision systems, network and server virtualization, and LAN and SAN flexibility
Connector Interface
- Stackable Buses
- PCIe Type 2 expansion bus
- PCI pass-through expansion bus (LAN24550 only)
- External I/O Connectors
- 2 RJ-45 jacks
Software
- Drivers for Windows 7 & Windows 10
- Open source Linux drivers included in the kernel
- Drivers included in most modern operating systems. Check with the OS manufacturer.
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height
- Above the module: 0.866 inches (22.00 mm)
- Below the module: 0.600 inches (15.24 mm)
- Weight:
- LAN24550HR (with heatsink): 0.35 lbs
- LAN34550HR (with heatsink): 0.35 lbs
- Standard Operating Temperature, 90% humidity non-condensing: -20 to +70°C
- Storage Temperature: -55 to +125°C
- MTBF
- LAN24550HR: TBD
- LAN34550HR: TBD
- Input Power Requirements: +5 VDC
- Typical Power Consumption:
- Idle with no connections: 4.95 W
- Ethernet cable loopback
- Using the transmit/receiver tool of LANCONF on both ports: 8.75 W
- With only 10 GigE linked on both ports: 8.45 W
Documentation and Downloads
- Hardware Manual
- Rugged Enclosure (IDAN) Datasheet
Ordering Information
| Part Number | Description | Value OEM |
|---|---|---|
| LAN34550HR | PCIe/104 10 Gbit/s Twisted Pair Ethernet Controller | $1195 |
| LAN24550HR | PCI/104-Express 10 Gbit/s Twisted Pair Ethernet Controller | $1245 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
[email protected] | +1-814-234-8087