Embedded Quad Sync Serial Port
Synchronous/Asynchronous Serial Port Module in PCIe/104 and PCI/104-Express
Operating Temperature -40° to +85°C
Mouseover thumbnails below to view larger images. |
| Rugged IDAN configurations available |
Description
The SER25316HR and SER35316HR Synchronous/Asynchronous Serial Port modules are flexible solutions to serial communication requirements. They provide four ports that are compatible with SDLC, HDLC, Asynchronous, and many other communications protocols. Software-selectable signaling levels allows integration with RS‑232, RS‑422, and RS‑485 systems. Direct Memory Access (DMA) to the host provide for efficient data transport, and allow operating at up to 9.6 Mbps with minimal overhead. The SER25316HR and SER35316HR are Universal PCIe/104 boards that use a PCIe x1 link.
Key Features
- PC/104 form factor
- Bus Structure Options:
- PCIe/104 (SER35316HR)
- PCIe universal expansion bus (Type 1 or Type 2)
- PCI/104-Express (SER25316HR)
- PCIe universal expansion bus (Type 1 or Type 2)
- PCI pass-through expansion bus
- PCIe/104 (SER35316HR)
- PCI Express bus details
- PCIe x1 interface (Gen 2, 5 GT/s)
- PCIe link repopulation allowing increased PCI Express stack capacity
- In-band interrupts and messages
- Message Signaled Interrupt (MSI) support
- Four Universal Synchronous/Asynchronous Receiver/Transmitter (USART) Serial Ports
- General Features
- Software configurable RS-232, RS-422, and RS-485
- Maximum bit rate
- 150 kbps in RS-232 mode
- 9.6 Mbps in RS-422 and RS-485 mode
- Supports SDLC, HDLC, Raw Data, and Asynchronous
- Encoding with NRZ, NRZI, Bi-Phase Mark, Bi-Phase Space, and Manchester
- Optional data inversion
- Configurable CRC
- Supports any 8, 12, 16, or 32-bit polynomial
- Compatible with SDLC and HDLC
- Fully configurable Data Frame
- Data width of 1 to 16 bits
- Start Bit, Stop Bit, Parity Bit Enable/Disable
- Full DMA data paths
- Compatible with non-continuous (bursted) clocks
- Transmit Features
- Optional automatic insertion of SDLC/HDLC Flag and CRC
- Optional transmit Delay
- Error insertion by using Raw Data
- Configurable Idle Character (1 to 32 bits)
- Receive Features
- Optional filtering of repeated SDLC/HDLC Flag characters
- Receive Log captures statistic of received packet
- Time of arrival
- Error
- Location in receive buffer
- Packet length
- Clocking features
- Transmit and Receive paths are clocked independently
- Internal (Baud Rate Generator) or External clock
- Can recover clock from data
- Clock statistics
- Measured frequency
- Setup and Hold Time
- General Features
- Available in stackable, rugged enclosures
- Requires only +5 VDC for operation
Connector Interface
- Stackable Buses
- PCIe universal expansion bus (Type 1 or Type 2)
- PCI expansion bus (SER25316 only)
- External I/O Connectors
- Two 40-pin right-angle headers: RS-232/422/485 serial ports (jumplerless configurable)
Software
- Windows 7 and 10 (32-bit and 64-bit)
- Linux 3.16 kernels and later (64-bit)
- Linux 4.4 kernels and later (32-bit)
- Source code provided for easy porting to other platforms, including RTOSes
- Example programs with source code provide a starting point for developing custom applications
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight: Approximately 0.14 lbs. (0.06 Kg)
- Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
- Storage Temperature: -55 to +125°C
- MTBF: 963,667
- Input Power Requirements: +5 VDC
- Typical Power Consumption: 3.0 W, 0.60 A
Documentation and Downloads
Ordering Information
| Part Number | Description | Value OEM |
|---|---|---|
| SER35316HR | PCIe/104 Sync Serial Port Module | $1545 |
| SER25316HR | PCI/104-Express Sync Serial Port Module | $1595 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
[email protected] | +1-814-234-8087