CM18407HR
PCI-104 Five-Port USB 2.0 Network Module
Operating Temperature -40° to +85°C
|
|
|
Features
- PC/104 form factor
- PCI-104 stackable bus structure [click here
for PC/104-Plus]
- Five Independent USB 2.0 Network Connections
- USB1 provides 2.0A @ +5V
- USB2-5 provides 500mA @ +5V
- 3.3V and 5V PCI signaling compatible
- Hi-Speed USB transfer speed modes: high-speed (480 Mbit/s),
full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) on any channel
- Full Duplex support
- Chipset
- NEC 720101 USB 2.0 Controller
- Bus Mastering
- Available in stackable, rugged enclosures
I/O
- Standard USB-Type A or 10-pin twisted pair connectors
- PCI stack through bus
Software
- Uses standard EHCI and OHCI drivers built into modern operating
systems.
- USB 2.0 natively supported under:
- Windows 2000 Service Pack 4
- Windows XP Service Pack 1
- Windows Server 2003
- Windows CE .NET 5.0
- Linux kernel 2.4.22
- Linux kernel 2.6
- QNX Neutrino 6.3
- VxWorks 6.0
Recommended Accessories
Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight: Approximately 0.22 lbs. (0.10 Kg)
- Standard Operating Temperature, 90% humidity non-condensing: -40 to
+85°C
- Storage Temperature: -55 to +125°C
- MTBF: 3,848,671 hours
- Power Consumption: 0.5 W at 5 V (board only)
- Note: Power consumption can increase depending
upon the type and number of USB devices attached.
Documentation and Downloads
Ordering Information
Part Number |
Description |
Value
OEM |
CM18407HR |
PCI-104
Five-Port USB 2.0 Network Module |
$495 |
|
RTD Embedded Technologies, Inc.
Designed and Made in the USA
[email protected] | +1-814-234-8087
Home | PC/104 Menu | Rugged Systems | Accessories | Support | About RTD
Copyright © 1998-2023 RTD Embedded Technologies, Inc. All rights reserved.