IDAN-CME136686LX
Stackable Packaging System for CME136 PC/104 Single Board Computers & Controllers
AMD Geode LX800 333 MHz & 500 MHz Processor
Includes CMT36106HR 2.5" Hard Drive Carrier
Mouseover thumbnails below to view larger images. |
Key Features
- Complete PC-compatible Single Board Computer
- PC/104 stackable bus structure
- AMD Geode LX800 Processor
- 333 MHz and 500 MHz options
- 256MB or 512MB SDRAM (Surface-Mounted)
- Onboard Industrial ATA/IDE Flash Drive up to 8GB (1GB Standard)
- PC Speaker
- Real Time Clock Battery backup
- Modular rugged milled aluminum frames
- Integral Structural Heatsink with Embedded Heatpipe, Eliminates fan
- Maintains the PC/104 bus self-stacking concept
- Allows quick interchangeability of modules
- Each frame includes wiring, connectors, CME136686LX cpuModule and CMT36106HR 2.5" Hard Drive Carrier Module (Installation of Flash Drive available. May affect standard operating temperature.)
- Aluminum Alloy - 6061, Temper-T6
- Finish - MIL-PRF-85285 polyurethane topcoat, per FED-STD-595, color 36495 (light gray). Panel engravings per FED-STD-595, color 37038 (black).
- Additional paint options available upon request
External I/O Ports
- Two 9-pin male D-Sub connectors with RJ-45 Adapters
- 10/100 BASE-T Ethernet
- Ethernet Controller
- Intel 82551QM Fast Ethernet PCI Controller
- Integrated 3KByte Transmit and 3Kbyte Receive FIFOs
- Physical Layer
- 100Base-Tx and 10Base-T
- Easy to Use
- Low Power Features
- Status LEDs
- Software configuration
- Ethernet Controller
- 10/100 BASE-T Ethernet
- 15-pin female high density D-Sub Monitor connector & 20-pin female micro D-Sub LVDS Panel connector
- SVGA CRT interface and LVDS Panel
- Pipelined burst reads/writes for increased performance
- Video Generator improves memory efficiency for display refresh with SDRAM
- Supports following modes:
- 640 x 480 (256 & 64K color)
- 800 x 600 (256 & 64K color)
- 1024 x 768 (256 & 64K color)
- 1280 x 1024 (256 color)
- SVGA CRT interface and LVDS Panel
- Two 9-pin male D-Sub connectors
- Software-configurable RS-232/422/485 serial ports
- 16550 compatible UARTs for high-speed
- Termination resistors for RS-422/485
- Software-configurable RS-232/422/485 serial ports
- 9-pin female D-Sub connector
- Two USB 2.0 Ports
- High-speed, full-speed, or low-speed
- 500 mA @ 5 Vdc provided per port
- USB Boot capability
- Two USB 2.0 Ports
- 25-pin female D-Sub connector
- multiPort function connector
- Parallel port
- SPP, PS/2 bi-directional, EPP & ECP
- Advanced Digital I/O (aDIO™)
- One 8-bit port programmable as input or output
- Eight bit-programmable I/O with Advanced Digital Interrupt Modes
- Event Mode Interrupt generates an interrupt when any input bit changes
- Match Mode Interrupt generates an interrupt when input bits match a preset value
- External Strobe Mode latches 8 data inputs and generates and interrupt
- Two Strobes can be configured as readable inputs.
- Floppy controller interface
- Parallel port
- multiPort function connector
- 6 pin female mini-DIN connector
- PS/2 Mouse port
- 6 pin female mini-DIN connector
- PC compatible keyboard port
- Hardware Reset Button
- 9 pin female D-Sub connector
- Power I/O port
- Gnd, ±12 & 5 VDC
- Power I/O port
Internal I/O Ports
- EIDE Controller
- 32-pin SSD socket:
- Up to 8GB Onboard Industrial ATA/IDE Flash Drive (1GB Standard)
- Flash Drive PIO Mode with BIOS-configured write protect function (available upon request)
- Natively supported by all major operating systems
Software
- RTD Enhanced BIOS with built-in SETUP, USB Boot and Quick Boot Mode Installed
- Compatible with x86 operating systems:
- MS-DOS
- Windows (XP and XP Embedded)
- Linux (desktop and real-time versions)
- RTOSes such as QNX, VxWorks, Windows CE, and xPC Target
- Note: Drivers may be required to use non-PC hardware features
Physical Attributes
- Dimensions
- Length: 5.983 inches (152.000 mm)
- Width: 5.117 inches (130.000 mm)
- Height: 1.339 inches (34.000 mm)
- Weight: Approximately 0.69 Kg (1.52 lbs.)
- Operating Temperature: -40 to +85°C: 90% humidity non-condensing
- Storage Temperature: -55 to +125°C
- ATA Flash Drive limit: -40 to +100°C
- MTBF
- IDAN-CME136686LX...-256D: 404,849 hours
- IDAN-CME136686LX...-W512D: TBD
- Input Power Requirements: +5 VDC
- Typical Power Consumption:
- IDAN‑CME136686LX333HR‑256D: 5.7 W
- IDAN‑CME136686LX500HR‑256D: 6.2 W
- IDAN‑CME136686LX333HR‑512D: 5.8 W
- IDAN‑CME136686LX500HR‑512D: 6.3 W
Board-Level Specifications
Documentation and Downloads
- CME136686LX Hardware Manual
- CMT36106 Hardware Manual
- Geode LX Migration guide
- Drivers and Example Programs
- Software Manual(s)
- Application Notes
Ordering Information
| Part Number | Description | Processor Speed |
DDR |
Value OEM |
|---|---|---|---|---|
| IDAN‑CME136686LX333HR‑256D | PC/104 cpuModule with 1GB flash drive in modular IDAN frame | 333 MHz | 256MB | $3595 |
| IDAN‑CME136686LX500HR‑256D | PC/104 cpuModule with 1GB flash drive in modular IDAN frame | 500 MHz | 256MB | $3795 |
| IDAN‑CME136686LX333HR‑512D | PC/104 cpuModule with 1GB flash drive in modular IDAN frame | 333 MHz | 512MB | $3795 |
| IDAN‑CME136686LX500HR‑512D | PC/104 cpuModule with 1GB flash drive in modular IDAN frame | 500 MHz | 512MB | $3995 |
— Sequentially laminated PCB fabricated in accordance with IPC-6012 Class 3 Standards —
*OEM price includes 256MB or 512MB soldered SDRAM and 1GB flash drive (8GB flash drive available)
RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087

