SPM176430 Coprocessors
Industrial DSP Modules with Bus Master or Target Only PCI Interface
![]() |
SPM176430 DSP Module |
![]() |
Rugged IDAN configurations available |
Key Features
- PC/104-Plus Form Factor
- Stackable 120-pin PCI expansion bus
- Stackable 104-pin AT expansion bus
- 3.3V & 5V PCI signaling compatible
- TMS320C6416T DSP (600 MHz or 1.0 GHz)
- 8000 MIPS operation
- Linearly Addressable PCI Interface
- Eight 32-Bit Instructions/Cycle
- 1.0ns cycle time
- 32 MB SDRAM
- 800 MB/s memory transfer rate
- 2 Mbytes flash
- All DSP resources accessible from the PCI bus
- VLIW instruction device
- Watch-Dog Timer
- Bus master or target only (Switch Enabled)
- Complete High performance DSP Co-processor module
- Stackable 104-pin AT expansion bus
- Stackable 120-pin PCI expansion bus for use with PC/104-Plus and PCI-104 modules
- 3 Multi channel Buffered Serial Port (McBSP) (max. 75Mbit/s )
- Boot Mode: PCI, or Flash Boot Mode (switch Enabled ROM Boot Mode (Switch Enable)
- All resources of the DSP can be accessed from the PCI bus
- TMS320™ DSP ALGORITHM STANDARD
- Mating Connectors
- Standard 14-pin 0.1" DIL header (JTAG)
- Standard 12-pin 0.1" DIL header (Power)
- Standard 10-pin 0.1" DIL header (SyncBus)
- 3 Standard 10-pin 0.1" DIL headers (McBSP)
I/O
- TI Processor
- Three Multi channel Buffered Serial Ports (McBSP):
- Buffered Asynchronous Memory Interface of the DSP
- High speed data transfer device between the DSP and the analog interface
- TI/EI, MVIP, SCSA, ST bus, AC97 SPI Compatible
- JTAG emulator connector
- Boundary-Scan-Compatible
- SyncBus for Synchronous operation with RTD's Data Acquisition boards
Software
- Supported under the following operating systems:
- DOS (DPMI32)
- Windows 98/NT4/2000/XP
- Linux (2.4 and 2.6 kernels)
- Includes the RTD dspFramework, a suite of libraries and example programs to simplify application development. Key features of the RTD dspFramework include:
- Matching host-side and DSP-side libraries
- Standard interfaces for passing messages between the DSP and the host system
- Ability for the host to call DSP functions
- Support for single and multi-threaded applications (DSP/BIOS)
- Support for on-board hardware (McBSP, SyncBus, Flash, etc)
- DSP applications can be downloaded through the PCI bus, or programmed into the on-board flash
- Modular design and full source code makes it possible to modify and extend the framework
- Source code, example programs, and API documentation are included for all supported platforms
- TI Code Composer Studio required to develop and compile DSP applications

Physical Attributes
- Dimensions
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight: Approximately 0.22 lbs. (0.10 Kg)
- Standard Operating Temperature, 90% humidity non-condensing:
- SPM176431HR600-32: -40 to +85°C
- SPM176431ER1000-32: -40 to +85°C
- Storage Temperature: -55 to +125°C
- MTBF:
- SPM176430HR600-32: TBD
- SPM176430ER1000-32: TBD
- Power Consumption (@ 5 VDC typical):
- SPM176430HR600-32: 2.7 W
- SPM176430ER1000-32: 5.4 W
Documentation and Downloads
- TI DSP Tools and Software
- Contact RTD for additional documentation and software.
Ordering Information
Part Number | Description | Value OEM |
---|---|---|
SPM176430HR600-32 | 600 MHz PC/104-Plus DSP Module with 32MB SDRAM | $2495 |
SPM176430ER1000-32 | 1.0 GHz PC/104-Plus DSP Module with 32MB SDRAM | $2995 |
RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087