PCI Express Intel Xeon CPU

CMA34KB: Intel^® Xeon & Core i3 High-Performance SBCs
PCIe/104 Single Board Computer & Controllers

Industrial Temperature ( -40 to +85°C) Available

Description

The CMA34KB is an advanced PC/104 single board computer with a PCIe/104 stackable bus structure. As a part of RTD's PCI Express offering, this quad-core CPU based on Intel's 7th generation Xeon processor (formerly codenamed Kaby Lake) is exceptionally suited for intelligent systems requiring high performance in harsh thermal conditions. A dual-core Intel Core i3 version is also available.

For all models, TPM 2.0 (Trusted Platform Module) is included for hardware-based cryptography. The surface-mount Type 2 PCI Express connectors enable users to stack multiple peripheral modules above and below the CPU. Standard CPU configurations do not include on-board flash (60GB SSD available for an additional cost).

Processor Brand Name	Cores/ Threads	Clock Speed (GHz)	Max Turbo (GHz)	DDR4 SDRAM	ECC Memory	TPM	SSD Max	SATA Ports	PCIe x4	PCIe x1	Gig Eth.	USB 3.0	USB 2.0	Serial	aDIO	Display Port w/ Audio
Intel Core i3-7102E	2C/4T	2.1	–	16GB	yes	2.0	60GB	5*	4	8	2	4*	5*	4	14	1
Intel Xeon E3-1505L v6	4C/8T	2.2	3.0
Intel Xeon E3-1505M v6	4C/8T	3.0	4.0

* Note: Some signals are brought out to I/O connectors and others are available on the stackable PCIe/104 bus. See below for details.

Rugged IDAN system configurations available

Key Features

PC/104 form factor
PCIe/104 stackable bus structure
- PCIe Type 2 expansion buses
Complete PC-compatible Single Board Computer (SBC)
Available in modular, rugged enclosures and eBuild systems
Intel Processor Options
- Core i3-7102E
  - 2 Cores, 4 Threads
  - 2.1 GHz Clock Speed
  - 100°C Max. Core Temperature
- Xeon E3-1505L V6
  - 4 Cores, 8 Threads
  - 2.2 GHz Clock Speed
  - 3.0 GHz Max Turbo Frequency
  - 100°C Max. Core Temperature
- Xeon E3-1505M V6
  - 4 Cores, 8 Threads
  - 3.0 GHz Clock Speed
  - 4.0 GHz Max Turbo Frequency
  - 100°C Max. Core Temperature
16GB Dual-Channel DDR4 SDRAM (Surface-Mounted)
- Robust Error Code Correction (ECC)
- Pricing Note: Due to market volatility, DDR4 memory adder may apply.
Up to 60GB standard surface-mounted industrial-grade SATA flash drive available
Five added SATA Ports
Four x4 PCIe Links
Eight x1 PCIe Links
Dual Gigabit Ethernet
Four Serial Ports (RS-232/422/485)
Five USB 3.0 Ports (one Type A connector, four on PCIe/104 bus)
Three USB 2.0 Ports
DisplayPort 1.2
- Supports 4K resolution
- Includes Audio
14 Advanced Digital I/O (aDIO)
Battery backup
Speaker port
Trusted Platform Module (TPM)
- Fully compliant to the Trusted Computing Group (TCG) Trusted Platform Module (TPM) version 2.0 specification, Level 00, Revision 1.38
- Provides for secure storage of cryptographic keys
Heat Sink Options
- Thermal-optimized mini-fan heat sink included (standard)
- Modified heat sinks and flat heat spreaders are available
- An optional heat spreader is available for mounting to a cold plate
For all RTD products, modifications are available upon request

Technical Details

Stackable Expansion Buses
- Type 2 PCIe Stacking Up (separate from down-stacking bus)
  - Four PCI Express x1 Links (Gen 3, 8GT/s)
  - Two PCI Express x4 Links (Gen 3, 8GT/s)
  - Two SATA Ports (Revision 3.0, 6Gb/s)
  - Two USB 3.0 Ports (compatible with USB 2.0)
  - SMBus
  - ATX Power Supply Signaling
  - RTC Battery
- Type 2 PCIe Stacking Down (separate from up-stacking bus)
  - Four PCI Express x1 Links (Gen 3, 8GT/s)
  - Two PCI Express x4 Links (Gen 3, 8GT/s)
  - Two SATA Ports (Revision 3.0, 6Gb/s)
  - Two USB 3.0 Ports (compatible with USB 2.0)
  - SMBus
  - ATX Power Supply Signaling
  - RTC Battery
Processors and Chipset
- Processor Options
  - Intel 7th Gen Core (2C/4T): i3-7102E
  - Intel 7th Gen Xeon (4C/8T): E3-1505L v6
  - Intel 7th Gen Xeon (4C/8T): E3-1505M v6
- 14nm Lithography
- Intel Virtualization Technology (VT-x)
- Intel CM238 Chipset
Memory
- 16GB Dual-Channel DDR4 SDRAM
- Surface mounted for maximum reliability
- Features robust Error Code Correction (ECC)
- Transfer rate of 2400 MT/s (PC4-19200) for maximum performance
- Pricing Note: Due to market volatility, DDR4 memory adder may apply.
Optional onboard Serial ATA (SATA)
- Up to 60GB Surface-Mounted SATA Flash Drive
  - Built in Wear Leveling, Error Correction, and Bad Block Management
  - SMART supported (Self-Monitoring, Analysis and Reporting Technology)
  - Write protection may be enabled/disabled through the BIOS
  - Note: Flash drives are not inlcuded in RTD's standard CPU configurations. If you require soldered flash memory, please contact RTD Sales for pricing and availability.
External Serial ATA (SATA)

One SATA data connector (Revision 3.0, up to 6.0 Gbit/sec interface speed)
Four additional SATA ports (two on the top bus connector, and two on the bottom)
- Use with drive carriers or cable kit
- (Top bus connector) 2 SATA ports at Revision 3.0, up to 6.0 Gbit/sec interface speed
- (Bottom bus connector) 2 SATA ports at Revision 3.0, up to 6.0 Gbit/sec interface speed

Video
- Intel HD Graphics P630
- DisplayPort outputs
- DisplayPort output may be adapted to Analog VGA, DVI, or HDMI
- Supports 4K resolution
Dual Gigabit Ethernet
- Intel I210-IT PCIe v2.1 Controller
- 1Gb/s speed with auto-negotiation
- Jumbo Frame Support
- PXE Network Boot
USB 2.0
- HighSpeed, FullSpeed, or LowSpeed
- Four Ports
- Automatically resettable over-current protection (700 mA @ 5Vdc) for onboard ports
- USB Boot capability
Serial Ports
- Four RS-232/422/485 serial ports on two connectors, each connector configurable as:
  - One full RS-232 port with TxD, RxD, CTS, RTS, DSR, DTR, RI, and DCD
  - One RS-422/485 port with TxD+, TxD-, RxD+, RxD-
  - Two RS-232 ports:
    - One with TxD, RxD, RI, DCD, DSR, and DTR
    - One with TxD and RxD
  - Two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-
- 120 ohm termination for RS-422/485 Mode
- Serial Ports Modes are BIOS-configured, no jumper settings required
- Standard PC 16550/16750 UART Interface
- Baud rate multiplier allows rates up to 1 Mbps with standard drivers
- Increased FIFO size of 512 bytes improves reliability at higher rates
- Echo cancellation, Auto-RTS, and Auto-CTS allow for greater efficiency
Advanced Digital I/O (aDIO)
- One 8-bit-programmable I/O with Advanced Digital Interrupt Modes
  - Event Mode Interrupt generates an interrupt when any input bit changes
  - Match Mode Interrupt generates an interrupt when input bits match a preset value
  - External Strobe Mode latches 8 data inputs and generates and interrupt
- One 4-bit port programmable as input or output
- Two Strobes can be configured as readable inputs
Thermal Management
- Thermal Throttling reduces clock speed to prevent thermal runaway
- Auto Fan Control only runs fan when needed
- Hardware monitor for temperature
- Mini Fan Heatsink with Auto Fan control
- Passive Structural Heatsink & Heatpipes in IDAN and HiDAN System Configurations
Power Management
- ACPI 4.0a Support
- ATX Support for “Soft Off”
Additional Hardware Features
- Watchdog Timer
- Utility Port 2.0
  - 1x USB 2.0 Port with over-current protection (700 mA @ 5Vdc)
  - Real Time Clock (external battery to maintain time only)
  - PC Speaker
  - ATX Power Button Input
  - Reset Button Input

Software

RTD Enhanced BIOS
- Supports boot from SATA, USB, or Ethernet (PXE)
- Flash-based CMOS Setup – No battery required to store settings
- UEFI Shell – Access a command prompt
- Special RTD Reliability Enhancements
Compatible with all x86 PC operating systems:
- DOS (MS-DOS, ROM-DOS, PC-DOS)
- Windows (7, 8.1, 10, Embedded Standard), both 32 and 64-bit editions
- Linux (desktop and real-time versions)
  - See app note for more details
- RTOSes such as QNX, VxWorks, Windows CE, and xPC Target
- Note: Some hardware interfaces may require special drivers
Includes pre-installed Datalight ROM-DOS
Drivers and support provided for DOS, Windows, and Linux

Recommended Accessories

XK-CM107 Cable Kit
- Utility Port 2.0 breakout
XK-CM125 Cable Kit
- Mixed cable kit for CPU feature breakout
SATA Card Carrier
ATX Power Supply

Physical Attributes & Environmental

Heat Sink Options
- Thermal-optimized mini-fan heat sink included (standard)
- Standard flat heat spreader available for mounting to a cold plate
- Modified heat sinks available
Dimensions
- Board Size
  - Length (L): 3.925 inches (99.70 mm)
  - Width (W): 3.550 inches (90.17 mm)
  - Thickness: 0.093 inches (2.36 mm)
- I/O Extension
  - Length (EL): 3.125 inches (79.38 mm)
  - Width (EW): 0.500 inches (12.70 mm)
- Stand-off Height
  - Above the CPU: 0.866 inches (22.00 mm)
  - Below the CPU: 0.600 inches (15.24 mm)
Weight: Approximately 0.574 lbs. (0.261 Kg) with fan heatsink
Standard Operating Temperature, 90% humidity non-condensing:
- Core i3 (CMA34KBD2100HR): -40 to +85°C
- Xeon (CMA34KBQ2200HR): -40 to +85°C
- Xeon (CMA34KBQ3000HR): -40 to +75°C
Storage Temperature: -40 to +85°C
MTBF: TBD
Input Power Requirements: +12 VDC
Power Consumption
- CPU power consumption is heavily influenced by the running software and system activity.
- Please refer to the hardware manual for detailed consumption scenarios.

Documentation and Downloads

Interactive model to illustrate feature and connector placement. Final hardware configuration may include component variations.

Ordering Information

RTD Ordering Part Number	Processor Brand Name	Cores/ Threads	Clock Speed (GHz)	DDR4 SDRAM	SSD*	Value OEM†
CMA34KBD2100HR-16384/S0GX	Intel Core i3-7102E	2C/4T	2.1	16GB	0GB	$4395
CMA34KBQ2200HR-16384/S0GX	Intel Xeon E3-1505L v6	4C/8T	2.2			$4695
CMA34KBQ3000HR-16384/S0GX	Intel Xeon E3-1505M v6	4C/8T	3.0			$4795

— Sequentially laminated PCB fabricated in accordance with IPC-6012 Class 3 Standards —
*Surface-mount flash drive available (call for pricing).
†OEM price does not include DDR4 memory adder.

RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087