FPGA35S6045HR & FPGA35S6100HR
PCIe/104 Xilinx Spartan-6 User Programmable FPGA Modules
Operating Temperature -40° to +85°C
![]() |
FPGA35S6xxx Spartan-6 FPGA Module |
![]() |
Rugged IDAN configurations available |
Key Features
- PC/104 form factor
- PCIe/104 stackable bus structure
- PCIe universal expansion bus (Type 1 or Type 2)
- PCIe x1 interface
- Xilinx Spartan-6 FPGA (device options listed below)
- XC6SLX45T
- 46,661 Logic Cells
- 2,489 Kb of internal RAM
- Provides PCIe interface (PCIe is not repopulated)
- XC6SLX100T
- 101,261 Logic Cells
- 5,800 Kb of internal RAM
- Provides PCIe interface (PCIe is not repopulated)
- 1.0 Gbit of DDR2 SDRAM (configured as 64M x 16)
- Onboard flash for FPGA configuration
- No need to re-load FPGA at power up
- On-board 27 MHz oscillator
- Provides a hardware platform for user to create FPGA code and drivers
Description
The FPGA35S6045 and FPGA35S6100 are PC/104 FPGA modules with a PCIe/104 stackable bus structure. The FPGA35S6xxx modules provide a platform for customer developed FPGA code. They are based on a Xilinx Spartan-6 with a hardware PCIe x1 endpoint to provide the interface to the host CPU. On board DDR2 memory provides dedicated storage space for the FPGA application. A total of 88 I/O pins interface the FPGA to the outside world, and allow for a variety of signal levels.
I/O
- 48 5V tolerant Digital I/O
- Selectable pull-up/pull-down per byte
- Pull-up can be 3.3V or 5V
- ESD Protected
- Can be used as LVDS Input/Output or LVTTL Input/Output
- 40 3.3V tolerant High-Speed I/O
- Can be used as LVDS Input or LVTTL Input/Output
- Xilinx JTAG Connector for FPGA programming
Software
- Sample FPGA to demonstrate I/O pins, DDR memory, and PCIe interface
- DOS example program to use with sample FPGA
- Custom driver development required for other operating systems (e.g. Windows and Linux)
- Use of a driver development toolkit such as Jungo WinDriver is recommended
Recommended Accessories
- SK-FPGA35S6045HR Starter Kit
- FPGA35S6045 Module
- Xilinx Platform Cable USB II
- SK-FPGA35S6100HR Starter Kit
- FPGA35S6100 Module
- Xilinx Platform Cable USB II
- TB50 - 50 position screw terminal board
- XB50 - 50 position screw terminal extender board
- XT50 - 50-pin twisted pair cable XP50 - 50-pin flat ribbon cable
Physical Attributes
- Dimensions
- Length: 3.775 inches (95.89 mm)
- Width: 3.550 inches (90.17 mm)
- Stand-off Height: 0.600 inches (15.24 mm)
- Weight: Approximately 0.14 lbs. (0.06 Kg)
- Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
- Storage Temperature: -55 to +125°C
- MTBF
- FPGA35S6045HR: 2,471,464 hours
- FPGA35S6100HR: TBD
- Power Consumption: 2.5 W @ 5 V typical
Documentation and Downloads
Ordering Information
Part Number | Description | Value OEM |
---|---|---|
FPGA35S6045HR | PCIe/104 Spartan-6 XC6SLX45T User Programmable FPGA Module | $995 |
SK-FPGA35S6045HR | Kit: FPGA35S6045HR with Xilinx Platfrom Cable USB II | $1295 |
FPGA35S6100HR | PCIe/104 Spartan-6 XC6SLX100T User Programmable FPGA Module | $1145 |
SK-FPGA35S6100HR | Kit: FPGA35S6100HR with Xilinx Platform Cable USB II | $1445 |
For customization including additional FPGA sizes, contact sales@rtd.com.
RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com | +1-814-234-8087