|
Key Features
- PC/104 form factor
- PCI/104-Express stackable bus structure
- PCIe Type 2 expansion bus (stacking up)
- PCIe Type 1 expansion bus (stacking down)
- PCI expansion bus
- Standard stack-down configuration
- Stack-through or stack-up optional
- Complete PC-compatible Single Board Computer
- Intel Celeron M (ULV 722) Processor on 45nm
- Clock Speed: 1.20 GHz
- Max. Core Temperature: 105°C
- 2GB DDR2 Memory (Surface-Mounted)
- Onboard Industrial SATA Flash Drive up to 32GB (4GB Standard)
- Eight x1 PCIe Links
- One x16 PCIe Link (configurable as one x8 or one x4)
- Two SATA Ports
- Four Serial Ports (RS-232/422/485)
- Six USB 2.0 Ports
- Gigabit Ethernet
- Analog VGA & LVDS Panel
- Advanced Digital I/O (aDIO)
- Advanced Analog I/O (aAIO) available upon request
- -40 to +85°C standard operating temperature
- Heat Sink Options
- Thermal-optimized mini-fan heat sink included (standard)
- Modified heat sinks and flat heat spreaders are available
- The optional heat spreader shown on this page is designed for mounting to a cold plate
Description
The CMA22MCS is a powerful PC/104 single board computer with a PCI/104-Express
stackable bus structure. As
a part of RTD's advanced PCI Express offering, this Intel Celeron M (ULV
722)
based CPU is exceptionally suited for applications requiring
performance-rich technologies. With stackable PCI and PCI Express bus
connectivity, users have many options for add-in peripheral cards. An optional 32GB flash drive makes this CPU Windows 7
ready.
Technical Details
- Stackable Expansion Buses
- PCIe Type 2 (stacking up)
- Four PCI Express x1 Links
- Two SATA Ports
- Two USB 2.0 Ports
- SMBus
- ATX Power Supply Signaling
- PCIe Type 1 (stacking down)
- Four PCI Express x1 Links
- One PCI Express x16 Link
- Configurable as one x8 or one x4
- Two USB 2.0 Ports
- SMBus
- ATX Power Supply Signaling
- PCI
- Supports 3.3V and 5V Signaling
- 4 Bus Masters Supported
- ATX Power Supply Signaling
- Processor
- Intel Celeron 722 (Single Core 1.20 GHz)
- Processor Options Include:
- Execute Disable (XD/NX) Security
- 45nm Process
- Memory
- 2GB DDR2
- 800MHz SDRAM
- Dual Channel Interface for Increased Bandwidth
- Surface Mounted For Maximum Reliability
- Video
- Intel Graphics Media Accelerator 4500MHD
- Gen 5.0 graphics engine with 10 cores
- Dynamic Video Memory (32MB – 256MB)
- DirectX 10 Support
- Supports Windows Aero Glass Effects
- Analog VGA and LVDS Panel Interfaces
- Serial ATA (SATA)
- Up to 32GB Onboard Industrial SATA Flash Drive (4GB Standard)
- Three additional SATA ports (two on the top bus connector, one on
the bottom)
- Use with drive carriers or cable kit
- SATA revision 2.0, up to 3.0Gbit/sec interface speed
- Supports IDE mode for legacy compatibility or AHCI mode for improved
performance
- Supports Intel Matrix Storage RAID
- RAID0 – Multiple Drives Striped for Performance
- RAID1 – 2 Drives Mirrored for Redundancy
- Intel RAID drivers or OS support required
- Drive Hot Plug supported in AHCI/RAID with appropriate drive carrier
(IDAN-RSATA-SYS104)
- Gigabit Ethernet
- Intel 82567LM PHY + ICH9M Controller (PRO1000 Series)
- 10/100/1000 Auto-negotiation
- Jumbo Frame Support
- PXE Network Boot
- USB 2.0
- Two ports onboard
- Four additional ports available via PCIe/104
- Over-current protection (500mA @ 5Vdc)
- USB Boot capability
- Serial Ports
- Four RS-232/422/485 serial ports on two connectors, each connector
configurable as:
- One full RS-232 port with TxD, RxD, CTS, RTS, DSR, DTR, RI, and CD
- One RS-422/485 port with TxD+, TxD-, RxD+, RxD-
- Two RS-232 ports:
- One with TxD, RxD, CTS, and RTS
- One with TxD and RxD
- One RS-232 port with TxD and RxD, and one RS-422/485 port with TxD+,
TxD-, RxD+, RxD-
- Two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-
- 120 ohm termination for RS-422/485 Mode
- Serial Ports Modes are BIOS-configured, no jumper settings required.
- Standard PC 16C550 UART Interface
- Advanced Digital I/O (aDIO)
- One 8-bit-programmable I/O with Advanced Digital Interrupt Modes
- Event Mode Interrupt generates an interrupt when any input bit
changes
- Match Mode Interrupt generates an interrupt when input bits match a
preset value
- External Strobe Mode latches 8 data inputs and generates
and interrupt
- One 4-bit port programmable as input or output
- Two Strobes can be configured as readable inputs.
- Thermal Management
- Thermal Throttling reduces clock speed to prevent thermal runaway
- Auto Fan Control only runs fan when needed
- Hardware monitor for temperature and voltage
- Mini Fan Heatsink with Auto Fan control
- Passive Structural Heatsink & Heatpipes in IDAN and HiDAN System
Configurations
- Power Management
- Enhanced Intel SpeedStep – Dynamically throttle CPU
frequency/voltage based on processor load.
- ACPI 3.0 Support – Advanced Configuration and Power Interface
- ATX Support for “Soft Off”
- Additional Hardware Features
- XK-CM77 Cable Kit Included
- Watchdog Timer
- PS/2 Keyboard and Mouse
- Real Time Clock (external battery required)
- PC Speaker
- ATX Power Button Input
- Reset Button Input
Software
- RTD Enhanced BIOS
- Supports boot from SATA, USB, or Ethernet (PXE)
- Serial Console Redirection
- EEPROM-based CMOS Setup – No battery required to store settings
- Fail Safe Boot – Load DOS even if no boot device is present
- Special RTD Reliability Enhancements
- Compatible with all x86 PC operating systems:
- DOS (MS-DOS, ROM-DOS, PC-DOS)
- Windows (7, XP, Embedded Standard, XP Embedded)
- Linux (desktop and real-time versions)
- RTOSes such as QNX, VxWorks, Windows CE, and xPC Target
- Note: Some hardware interfaces may require special drivers
- Includes pre-installed Datalight ROM-DOS
- Drivers and support provided for DOS, Windows, and Linux
Physical Attributes
- Dimensions
- Board Size
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- I/O Extension
- Length (EL): 3.125 inches (79.380 mm)
- Width (EW): 0.500 inches (12.700 mm)
- Stand-off Height
- Above the CPU: 0.866 inches (22.00 mm)
- Below the CPU: 0.600 inches (15.24 mm)
- Weight: Approximately 0.44 lbs. (0.20 Kg) with heatsink
- Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
- Storage Temperature: -25 to +85°C
- MTBF: 447,197 hours
- Power Consumption: 13 W @ 5 V Typical
Recommended Accessories
Documentation and Downloads
Ordering Information
| Part Number |
Description |
Value
OEM* |
|
CMA22MCS1200HR‑2048/S4GX |
1.20 GHz PCI/104-Express cpuModule with 2GB
DDR2 SDRAM & 4GB Removable Flash Drive |
$4875 |
— Sequentially laminated PCB
fabricated in accordance with IPC-6012 Class 3 Standards —
OEM price includes 2GB soldered SDRAM and 4GB removable flash
drive (larger flash drive sizes available)
|
