IDAN-CMA34CR
Stackable Packaging System for CMA34CR PCIe/104 Single Board Computers & Controllers
Includes SATA34106HR 2.5" Hard Drive Carrier

 

(Front)

(Back)

Key Features

• PCIe/104 stackable bus structure
  • PCIe Type 2 expansion buses
• Complete PC-compatible Single Board Computer (SBC)
• Also available as a pre-configured eBuild system
• Intel Processor with ECC Memory
  • Core i7 3517UE
  • Dual-Core
  • 1.7 GHz Clock Speed
  • 2.8 GHz Max Turbo Frequency
  • 105°C Max. Core Temperature
• 4GB or 8GB Dual-Channel DDR3 SDRAM (Surface-Mounted)
  • Robust Error Code Correction (ECC)
• Up to 60GB standard surface-mounted industrial-grade SATA flash drive available
• Eight x1 PCIe Links
• Three x4 PCIe Links
• Five SATA Ports
  • Three ports available on the PCIe bus
  • One port available for internal cabling
  • One port consumed by the integrated SATA carrier
• Four Serial Ports (RS-232/422/485)
• Four USB 3.0 Ports on Type 2 expansion buses
  • Can also be used with USB 2.0 devices
• Three USB 2.0 Ports
• Dual Gigabit Ethernet
• Analog VGA
• Embedded DisplayPort (eDP) 1.1a
  • DisplayPort, DVI, and HDMI
  • Supports 4K resolution
  • Includes Audio
• Advanced Digital I/O (aDIO)
• Trusted Platform Module (TPM)
  • Fully compliant to the Trusted Computing Group (TCG) Trusted Platform Module (TPM) version 1.2 specification
  • Provides for secure storage of cryptographic keys
• Modular rugged milled aluminum frames
• Integral Structural Heatsink with Embedded Heatpipes & External Fins for superior heat dissipation
• Maintains the PC104 self-stacking bus concept
• Allows quick interchangeability of modules
• Each frame includes wiring, connectors, CMA34CR cpuModule and SATA34106HR
• 2.5" Hard Drive Carrier Module (Installation of Flash Drive available. May affect standard operating temperature.)
• Aluminum Alloy - 6061, Temper-T6
• Finish - MIL-PRF-85285 polyurethane topcoat, per FED-STD-595, color 36495 (light gray). Panel engravings per FED-STD-595, color 37038 (black).
  • Additional paint options available upon request

External I/O Ports

• Two 9-pin D-sub receptacles (male pins) with RJ-45 Adapters
  • 1000/100/10 BASE-T Ethernet
  • Gigabit Ethernet
    • Intel 82567LM PHY + ICH9M Controller (PRO1000 Series)
    • 10/100/1000 Auto-negotiation
    • Jumbo Frame Support
    • PXE Network Boot
• Two 9-pin D-sub receptacles (male pins)
  • Four RS-232/422/485 serial ports on two connectors, each connect configurable as:
    • One full RS-232 port with TxD, RxD, CTS, RTS, DSR, DTR, RI, and CD
    • One RS-422/485 port with TxD+, TxD-, RxD+, RxD-
    • Two RS-232 ports:
      • One with TxD, RxD, CTS, and RTS
      • One with TxD and RxD
    • One RS-232 port with TxD and RxD, and one RS-422/485 port with TxD+, TxD-, RxD+, RxD-
    • Two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-
  • 120 ohm termination for RS-422/485 Mode
  • Serial Ports Modes are BIOS-configured, no jumper settings required
  • Standard PC 16550/16750 UART Interface
  • Baud rate multiplier allows rates up to 1 Mbps with standard drivers
  • Increased FIFO size of 512 bytes improves reliability at higher rates
  • Echo cancellation, Auto-RTS, and Auto-CTS allow for greater efficiency
• One 9-pin D-sub receptacle (male pins) with USB Type A female adapters
  • Two USB 2.0 Ports
  • Five additional ports onboard
  • Automatically resettable over-current protection (500 mA @ 5Vdc)
  • USB Boot capability
• 15-pin high-density D-sub receptacle (female sockets)
  • Analog VGA Interface
• DisplayPort connector
  • DisplayPort, DVI, and HDMI (supports 4K resolution)
  • Audio
• 25-pin female D-sub receptacle (female sockets)
  • Advanced Digital I/O
    • One 8-bit-programmable I/O with Advanced Digital Interrupt Modes
      • Event Mode Interrupt generates an interrupt when any input bit changes
      • Match Mode Interrupt generates an interrupt when input bits match a preset value
      • External Strobe Mode latches 8 data inputs and generates and interrupt
    • One 4-bit port programmable as input or output
    • Two Strobes can be configured as readable inputs
  • Additional Hardware Features
    • ATX power button input
    • Reset power button input
    • RTC battery input
• Utility USB
  • High retention Type A connector
  • Complies with Class 1 Div II minimum withdrawal force of 15 N
  • Connection for standard USB devices such as:
    • Keyboard/mouse
    • Flash drives
    • Cameras
• BIOS configurable button
  • Can be configured for ATX power, or hardware reset
  • Button can be disabled

Internal I/O Ports

• SATA Controller
• Optional Surface-Mount Flash:
  • Up to 60GB Onboard Industrial SATA Flash Drive
  • Built in Wear Leveling, Error Correction, and Bad Block Management
  • SMART supported (Self-Monitoring, Analysis and Reporting Technology)
  • Write protection may be enabled/disabled through the BIOS
  • Note: Flash drives are not inlcuded in RTD's standard CPU configurations. If you require soldered flash memory, please contact RTD Sales for pricing and availability.

Recommended Accessories

• XK-CM117 Cable Kit
  • Breaks a 9-pin dual RS-232 D-sub into two 9-pin D-subs
• XK-CM118 Cable Kit
  • Breaks a 9-pin dual RS422/485 D-sub into two 9-pin D-subs

Physical Attributes

• Dimensions
  • Length: 5.98 inches (151.9 mm)
  • Width: 6.62 inches (168.1 mm)
  • Height: 1.62 inches (41.1 mm)
• Weight: Approximately 1.96 lbs. (0.89 Kg)
• Standard Operating Temperature, 90% humidity non-condensing:
  • Dual-core (IDAN-CMA34CRD): -40 to +85°C
• Storage Temperature: -40 to +85°C
• MTBF
  • IDAN-CMA34CRD1700HR-8192: TBD
• Power Consumption
  • CPU power consumption is heavily influenced by the running software and system activity.
  • Typical power consumption
    • IDAN-CMA34CRD1700HR-8192: 17 W
  • Please refer to the hardware manual for detailed consumption scenarios.

Board-Level Specifications

• CMA34CR Single Board Computer
• SATA34106HR 2.5 inch Hard Drive Carrier

Documentation and Downloads

• CMA34CR Hardware Manual
• SATA34106 Hardware Manual
• TPM Implementation User's Manual
• Drivers and Example Programs
• Software Manual(s)
• Application Notes

Ordering Information

IDAN Configuration Part Number	Processor Brand Name	Cores	Clock Speed (GHz)	SSD	DDR3 SDRAM	Value OEM*
IDAN‑CMA34CRD1700HR‑4096/S0GX	Intel 3517UE	2	1.7	0GB	4GB	$5995
IDAN‑CMA34CRD1700HR‑8192/S0GX					8GB	$5995

— Sequentially laminated PCB fabricated in accordance with IPC-6012 Class 3 Standards —
*OEM price includes soldered SDRAM. Surface-mount flash drive available (call for pricing).

 

RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com  |  +1-814-234-8087